Search results

  1. 8

    fixing door dings/chips

    I painted my k20 last spring and with my inexperience while aligning the doors and fenders i chipped them on the edges. I am highly considering repainting the truck but i am unsure what is the best method to fix these chips. Would i have to use filler puddy to fix the chipps that are on the...
  2. 8

    carpet wont lay right

    hey guys so iv got a new carpet for my k20 that has been laying in my truck for a few weeks now. I started to trim it to fit and i got those door sil peices that hold it down and i am confused. I can not get the carpet to lay down tottaly flat, i have these bulges of carpet. I guess its kinda...
  3. 8

    14 bolt ff issue

    I know that the locking tab does have a inner tab that fits into that key way slot but i dont have keys for the axle. I have been told that they are "optional" for some years but its just werid. I do have the axle together but i could pop the axles out if nessary
  4. 8

    14 bolt ff issue

    Hey guys i just got finished in putting my 14 bolt ff together and into my k20 and i have a concern. When i put the drums back on i out the locking nut back in along with that tabed llocking thing along with the next locking nut. I have the concern of i didnt put them in right. The inner...
  5. 8

    getting my heat to work

    Ok guys so iv reached that stage in my 6 year bugget restoration where i am putting my interior back together. One thing i am worried about is the heating system, for somreason it kinda worries me that its gona be really hard to this to work but i am unsure. When i took the interior...
  6. 8

    radiant tube heater

    Hey guys so i rent a shop in my area that that is basicly a 4 car garage that has a wooden beam cealing because there is tractors above me in storage. Cinder block walls except for the rear wall that divides me from the other guy who rents the same size space, that is a plywood 2x4 supported...
  7. 8

    how to remove hub from 10.5 drum

    Hey guys so i bought new drums for my 10.5 and am wondering how do i remove the hubs from the old drums so i can pull out the bearings and check them out to make sure they are ok? Thanks Liam
  8. 8

    what size shoes for 10.5

    awesome website!!! but it doesnt have my info. Does anyone know if the shoes and drums are the 13 inch or the 11? for a 10.5
  9. 8

    new tool box

    it is but....i work for penske truck leasing and they have a corporate rule that penske will buy employees there own box and its alot smaller than mine now. I may have to return it :,(
  10. 8

    what size shoes for 10.5

    thank you my friend
  11. 8

    what size shoes for 10.5

    what is the size of the drum too?? i would go measure them but im not at my shop
  12. 8

    what size shoes for 10.5

    im refreshing my 10.5 14bff that i see a couple different options for shoe size. So for a 10.5 14bff what is the shoe size. i would think 11x2? or 12x2 thank you
  13. 8

    my full floater rebuild

    thats my plan is to reuse what is still good. Im going to compare the price of all new drums and shoes and hardware to the price of rotors and calipers. Yes here is new york state you need an ebrake
  14. 8

    my full floater rebuild

    im going to those brakets are cheap for discs!!! but when i go to buy rotors and bearings and pads and calipers what vehicle to i tell them to look up at autozone
  15. 8

    my full floater rebuild

    Hey guys again thanks for your help on my rear axle questions on my other post. I have chosen to rebuild/refresh the 10.5 3/4 ton full floater i have. I dont want to cut off perches on that 1ton i have and move them. So i have starting taking the axle apart all looks good. no metal chunks...
  16. 8

    got a full floater for my k20!

    hummmmm. well the truck it came out of had a dana 60 up front so im assuming it was a 1ton. What about a full floater out of a 3/4 ton?? would i have to do the same issue. because i also have one of those . and when you say move them more ourbored do you mean i have to cut them off the axle...
  17. 8

    fender and door aligment issue

    nope all orginal GM metal
  18. 8

    got a full floater for my k20!

    why the difference ?? i mean i have a semi floater in it now the frames are the same arn't they?
  19. 8

    nice truck up here in buffalo!

    here is another!! http://buffalo.craigslist.org/bar/3526456789.html
  20. 8

    nice truck up here in buffalo!

    saw this today while doin my daily craigslist check. http://buffalo.craigslist.org/ctd/3528656624.html
  21. 8

    got a full floater for my k20!

    great ! haa.
  22. 8

    fender and door aligment issue

    yep iv got plenty of shims in it now lol
  23. 8

    got a full floater for my k20!

    i was told it was a 4.11 im 90% sure it is but i am going to check. and yes it is a full floater axels bolt in. It came out of a 85 1 ton . when i moved into my shop there was a rotted 85 1 ton there and we cut it up saved the axels and other crap. Seriously i would have to move the perches in??
  24. 8

    fender and door aligment issue

    new body mounts and new GM core support. i will try to pull that fender up. my other concern is pulling the fender up will make tha door and fender gap huge! and it wont match the other side.. My issue is on the driver side, my passanger side is fine
  25. 8

    got a full floater for my k20!

    So i got a 1 ton full floater i want to stick under my k20 to replace that semi floater. I plan on going through it just to check it out but dont plan to rebuild it except for brakes and lines. some day down the road i will install a posi. My issue is the axel is 4.11 my front orginal...

Latest posts

Forum statistics

Threads
45,562
Posts
986,295
Members
38,646
Latest member
EDNOMAD
Top