Search results

  1. B

    What years does this bezel fit?

    Trying to clear out extra parts and sell. What year does this gauge bezel fit? I assume by the large radio opening it's for 1988-91 one ton trucks and Blazer/Jimmy? Just want to make sure I list it accurately.
  2. B

    POL tubular upper control arms

    I have a pair of POL upper control arms. I had these installed for about 100 miles. I have stock height springs and these are made for lowering springs as they add 2 degrees camber, so I had to go back to stock uppers. They sell new for about $400...
  3. B

    Another 700R4 question

    Yes, another 700R4 question. As I have worked out nearly all the bugs in my truck since finishing it, this one now pops up not too long ago. In 4th gear, in lockup cruising on the highway, I occasionally get this thing where the best way to describe it is it feels like the transmission is...
  4. B

    700r4 shake?

    I'll make sure to tag @NickTransmissions for this one. So I've been chasing a driveline shake that starts at around 68mph and gets better over 75 or so. It comes back at about 85mph. This is my 1981 C-10, second frame-off build in the thirty-something years I've owned it. The motor is a new...
  5. B

    Wiper park position changed on it's own?

    I searched and found nothing similar. I just picked my truck up from having the GM posi replaced with an Eaton Truetrac (highly recommend btw). However, as with ANY time I entrust my truck to the care of another, it came back to me not exactly as I left it. They used the wipers because they test...
  6. B

    Check out my rear end

    What were you hoping for with that title you perverts? Ha, so I am having a vibration at around 67-72mph, and again way worse at about 85. It does it on the dyno so obviously it's drive line related. Wheels have been balanced, no change. The driveshaft was re-balanced with new u-joints when I...
  7. B

    Testing the wiring and gauge for 3 wire sensor

    This is probably a rudimentary question, but what is the proper way to test the wiring and gauge for a 3 wire pressure sensor? I have a Holley 0-100 psi sensor attached to my fuel pressure regulator. I am suddenly getting no reading from the sensor, but it is not because of a lack of fuel...
  8. B

    Bucket seat belt sleeves

    I put Recaro bucket seats ans a Blazer console in my cab. I had my factory seatbelts redone, and I got plastic seat belt sleeves for the buckle sides, but they just flop on the floor between the seat and console when not used. Then I saw these on LMC and elsewhere: But I'm lost on how these...
  9. B

    Glove box lock

    So I'm in the process of reinstalling my locking glove box after disassembling it a long time ago. I got the lock and latch reinstalled on the box using the correct key for the lock. However, now the latch is locked in the closed position, and the knob is locked and the key won't turn it. It is...
  10. B

    Precision windshield gasket too big

    Truck is finally out of paint, the shop had a glass company come to install the windshield. I had ordered a Precision gasket set that is definitely the correct one for the truck. The glass guy (old school, been doing this a long time) says that the gasket is way too big. I found a couple threads...

Latest posts

Forum statistics

Threads
48,669
Posts
1,074,250
Members
43,341
Latest member
Dave7968
Top