Search results

  1. E

    Starter wont turn, Tired of replacing parts

    Melted fusible link? Download the wiring diagram and start checking from the starter and work you way back to the ignition switch. You need to diagnose before replacing parts. We can walk you through the tests you need to figure out the issue.
  2. E

    What is this noise after belt change?

    Make sure your rear brakes are working
  3. E

    Front Windshield

    I am putting a slider in the rear. My truck has had one since we bought it in 1988. I have removed and installed it a few times over the years. I also have done the front glass once myself. For the extra $75 them glass guy charges for labor I let them do it.
  4. E

    Timing marks

    That was my rule in the shop. I had a clipboard and wrote down what you borrowed and the date. Crossed it off when returned. After 3rd time sorry can't borrow it, should have bought one. I used to have a guy always asking to borrow an adjustable wrench. I was at a garage sale and found this...
  5. E

    Timing marks

    Does Horrible Freight have anything good? I have tried to save money by buying things there. Returned or threw out everything. I will admit their tool boxes seem decent. Not Snap On, Mac or Marco quality but darn close and way less expensive. Buy good tools. You will have them for life. Buy...
  6. E

    Carpet size

    I think 4WD Automatic is high hump and manual gearbox 4WD is low hump.
  7. E

    Settling on timing

    No offense intended but why would you spend money rebuilding an engine and not replace your balancer? You can buy a timing light with an advance adjustment. If the knob is at 10 deg BTDC the timing mark will show up at zero with 10 deg BTDC. Much easier than trying to see the little numbers.
  8. E

    in tank fuel pump

    What made me so mad about the scraps of roofing felt was they do not mention what the material is on their site and they are literally scraps. For what you charged me, try and make it look good. Cut them to the proper size. Make an effort.
  9. E

    AC Condenser - Should I use New Or Original.

    A quick search for that number comes up with a seller on eBay. I have a 1987 V3500 7.4L. Bought my condensor from Rock.
  10. E

    in tank fuel pump

    Drop them with the brackets. They bolt from inside the frame. The brackets are not the same front and rear. The repro brackets fit pretty good. If you buy the tank isolator kit(s) from LMC just know you are getting scraps of roofing felt. I got hosed by this. Ended up buy some 1/16". x 2"...
  11. E

    Front Windshield

    I am getting close to the time for the front and rear glass installation. I will have a pro do it. I have done windshield many times over the years, rubber gasket, butyl and urethane types. I hate doing it and it takes me 10 times longer than a guy who is good at it. Ask around before you hire...
  12. E

    Timing marks

    Get yourself a timing light with an advance dial on it. If you want 10 degrees BTDC then just set it to 10 and when it lines up with the zero mark you are good to go.
  13. E

    "Oldsmobile Diesel" Conversion to gas

    I am with @backwoodsman. Add a good water separator and drive it. Back in those days diesel was real dirty too. It was dark colored and cloudy. Now diesel is much cleaner. No worse than the 6.2
  14. E

    1983 AC Lines

    You might find just buying a kit from vintage air is your best bet. The firewall is different on a non-A/C truck, you need brackets, pulleys, etc. Then you need to figure out hoses. Buy a kit and your life including getting spare parts is much easier.
  15. E

    305 serious sludge

    More than likely the pickup screen.
  16. E

    CNC machined emblems

    I plan to order emblems for my V3500 from this place. Click here.
  17. E

    Hi from Missouri!

    Welcome!
  18. E

    2 piece front drive shaft loose

    The front shaft has a cordon joint which is a bit trickier but not too hard. The original joints are installed with a plastic type epoxy. Takes a bit of force to break free but with a decent press it should work. The only thing you won't be able to do is lengthen it to fit your lifted truck and...
  19. E

    2 piece front drive shaft loose

    Depends on your transfer case.
  20. E

    Looking Tube, Air Conditioning (AC) Condenser Without Rear Air (Line) Part# 15568998

    I bought #7 from LMC for my 1987. Click me According the the parts catalog my 1987 V3500 takes that same part number. I have it out in the garage. I have not installed it yet. If you need pictures or measurements to verify let me know and I will get them to you.
  21. E

    Interior Finished!!

    Looks amazing. I hope mine comes out a good. I am looking for a good source for a rubber mat instead of carpet. My truck had the rubber mat and I replaced it with carpet 30 years ago. I really liked just washing it. The carpet was always dirty
  22. E

    2 piece front drive shaft loose

    Take it to a driveshaft place and have it fixed. Make sure to tell them the truck is lifted. I am sure they will be able to tell from the damage how long to make it. Just had both my driveshafts done. Rear - u-joints replaced and balanced. Front - Joints replaced and a new trunnion installed.
  23. E

    New Truck TBI Diag 1987

    Did you put the bulb into the wrong hole. TBI trucks do not have a choke. My 1987 GMC has a Check Engine Light. I think it says Service Engine Soon If you have no Check Engine light with the key on engine off. You have an issue. Need to resolve that before you can get it to run.
  24. E

    305 serious sludge

    In my 40 years in the automotive service business I have seen much, much worse. If it runs good buy a good synthetic oil of the proper weight, and change it along with the filter every 5,000 miles. It will, over time, dissolve the sludge. Make sure the engine runs at the proper temp. I would...

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,187
Members
43,338
Latest member
jw23655
Top