Ricko1966's latest activity
-
RRicko1966 replied to the thread Gas tank installation help please.I leave my hoses long and attached at the tank with clamps,with a second set of clamps loosely in place I pushup the tank,fish my hoses...
-
RRicko1966 reacted to legopnuematic's post in the thread Best way to transport 19 55 gallon barrels? with
Like.
Unless you are aiming for a record on the 1/4 mile, I agree it shouldn't be that light... Seeing the title of this thread pop up... -
RRicko1966 reacted to DoubleDingo's post in the thread Best way to transport 19 55 gallon barrels? with Like.
You have waste oil, get a hudson sprayer and coat the undercarriage
-
RTake off the distributor cap and rotor, make sure the advance weights are free to move and return to their resting spot. If you adjust...
-
RWhen I bought Crusty Biscuit the PO had installed an avs2 on it. I was constantly readjusting it. Since I had a spread bore intake and...
-
RIt's unlikely that you are actually getting vapor lock with the symptoms you are reporting and the equipment you have. If it was vapor...
-
RRicko1966 replied to the thread Electric fuel pump.My expierience with the little edelbrock pump wasn't good. I don't remember the details,it was over 10 years ago. The important part is...
-
RAre you SURE the float level is correct? It needs to be just below the sight glass window, if you shake the truck fuel should just...
-
RI don't know if I'll ever use it. I want to build some pre runner bumpers for my 4x4 Blazer. My try my hand at building my own exhaust...
-
RRicko1966 replied to the thread Weird solenoid looking thing.It's not complicated to get it hooked backup and functional. Give us a couple of good pics so we can see all the hoses,and post...
-
RRicko1966 replied to the thread What new tools have you got lately?.That's a pipe bender,or a tubing crusher. You will want to watch lots of you tube videos and read lots of people's posts for work...
-
RPulled the trigger on a couple of things I've wanted for a while. Got the beam addition for my Daytona jack. Better support for...
-
RRicko1966 replied to the thread Weird solenoid looking thing.Yep the esc would have gone with the original engine and distributor I'll take all the esc stuff if you want to pull it. The controller...
-
RRicko1966 replied to the thread Weird solenoid looking thing.Electronic spark control. It fights detonation. If your distributor has a 4 wire plug,that goes through the firewall you have ESC lots...
-
RTip in switch for the factory ESC system
