Rich77's latest activity
-
Rich77 replied to the thread Bolt pattern adapter.I’ve got a 2/4 drop. So these are the sizes I’m thinking about- 285/60/18 rear with 18x9.5 245/60/18 front with 18x8 Any thoughts? -
Most likely, it’s probably a liability issue…. I can’t think of what stores websites do factor in stuff outside of the factory size. But...
-
That wire was supposed to only be temporary to make sure you didn't have an ignition power problem. As soon as it didn't fix your...
-
That would do it. Good to hear you got it running
-
Rich77 replied to the thread Bolt pattern adapter.Are there any sites that sell wheels that fit squarebodies but will list wheels outside of the factory perameters? Some of them do, but...
-
-
Plus - they move the tire/wheel assembly outboard a bit, which changes the load on the wheel/axle bearings and can cause unusual tire...
-
Just not a good idea. Our shop will not remove a wheel with any kind of spacer or adapter. As soon as it is touched your liable.
-
Also, there are low quality spacers and there are high quality spacers. Some are an added failure point and some are stronger than the...
-
@bucket brought up some valid points,if you use equivalent backspacing to compensate for the adapter thickness that geometry would be...
-
So you have fuel and spark. If I read this correctly, you are sure that you have power to the spark when key is on (not cranking) and...
-
Rich77 replied to the thread Exhaust pipe bracket.Thank you!
