Recent content by plummrey

  1. plummrey

    Power window stuck halfway

    Your right!
  2. plummrey

    Power window stuck halfway

    I agree!
  3. plummrey

    Power window stuck halfway

    I just unbolted it and was able to tape it up, thought should go ahead if it needs to be replaced, thanks
  4. plummrey

    Power window stuck halfway

    I will try that, i came across a video U-wrench TV using meter probes and a drill battery as a switch bypass, may see if that would work, if not do as you said unbolting everything,, thanks
  5. plummrey

    Power window stuck halfway

    1984 C10, replaced both window motors/regulators two years ago, passenger side is fine, driver side is stuck, changed the switch on the door but thats not it. I do hear a clicking in the motor, i can push it up or down about an inch. I don’t see or feel anything in the way, wires are good...
  6. plummrey

    Hazards, signals and horn not working after steering wheel reassembly

    Got my parts and signals work ,, horn didn’t though,,, also my locking plate has the ring back on but plate isn’t flush or within on side the column,,, I ordered a new lock ring to see if a non worn one will work,,, the old one is in place but i can still try to push the plate back a little real...
  7. plummrey

    Hazards, signals and horn not working after steering wheel reassembly

    Yes that part, I agree!
  8. plummrey

    Hazards, signals and horn not working after steering wheel reassembly

    Thanks, I didn’t see anything burnt when looking a little bit ago. Hopefully the replacements will work, i didn’t get the part that the wiper stalk goes into with the wiper/ cruise control wires (my cruise control doesn’t work so I have a regular stalk in) not sure what that part is called but...
  9. plummrey

    Hazards, signals and horn not working after steering wheel reassembly

    No problem it is appreciated, yes wipers are on the column and i didn’t need to unplug that one underneath, and I made sure the long plug from the signal cam is matched up with colored wires (it won’t snap in if it’s turns around) I may just try new signal cam since they are too expensive, also...
  10. plummrey

    Hazards, signals and horn not working after steering wheel reassembly

    I just checked and it’s snapped in all the way , wires are fine not broken or anything.
  11. plummrey

    Hazards, signals and horn not working after steering wheel reassembly

    I will double check tomorrow, it clicked when snapped in while pressing down on each end to make sure all is together since it’s wide
  12. plummrey

    Hazards, signals and horn not working after steering wheel reassembly

    Was changing the ignition cylinder and had to realign the rack and plastic gear for the rod that connected to the nss switch, put everything back and the horn, hazards and signals won’t work (they worked before) My regular lights, parking lights and bright clicker works. The plastic piece for...
    • plummrey
    • Thread
    • no horn no signal not hazards steering wheel reassembly
    • Replies: 11
    • Forum: Tech Discussion
  13. plummrey

    Another ? Won’t crank, stalls and gears won’t go in gear

    Not sure what electrical would be but inside I can change gears as indicated but none are engaging I guess would explain better, you know when you put it in gear you feel it go in gear and hear it, but nothing is happening. Tomorrow I’ll do underneath to see about any linkage problem
  14. plummrey

    Another ? Won’t crank, stalls and gears won’t go in gear

    Lol Ive been having the wheel chocks no doubt, not trying to get rolled over regardless of what I’m working on
  15. plummrey

    Another ? Won’t crank, stalls and gears won’t go in gear

    Po put nice new battery cables, wires are correct on the starter. It starts up like it should now, just wondering about it not shifting, this really was all the sudden, a couple months ago. I drove it around the block in January no problem, no stalling, no up or down shift problems. Then in...
See more

Latest posts

Forum statistics

Threads
45,953
Posts
996,797
Members
39,151
Latest member
grego28
Top