Hey guys ok when I lowered my 74 I used cpp 2.5 spindles and mcgaughys 2" drop springs well I have still a 275-75-15 tire up front so when I took it off the stands,the truck sat so low the fender tubs sat on the tires and couldn't roll. So I took my stock springs and cut a half coil and...
I don't want a 295 the widest I'll go is a 275 but I was told that this 265 50 tire was really nice and different looking but I want to see it first on a c10
Hey is anyone running a 4-6 drop with 235/60-15 up front on stock 8" rally's and 265/50-15 out back on rally's? I'm thinking of running those sizes on tires but I'm gunna be ordering them and have no way to test fit first so I want to see an example if anyone has a pic...thank u!!
On a GM goodwrench motor is it better to run a standard performer eps or spend the extra and get the air gap? What is truly the difference? I have a stock cast intake now so anything is better
Is the comp cam XE268 a good choice for a little street cam? What's the pros and cons?? Stock brand new motor with 600 edlebrock carb,hedman headers,msd ignition
Well I did move the bottom mount from the stock location Just a bit but it's basically in the same area as u can see,so it is moved a bit so I'm wondering if this is why I'm having issues but I moved it for a reason because the stock location after I did all the lowering work was not running...
Really stock length? When I first encountered this issue it had happened on one side only and I had to buy a temporary shock until I ordered the matching one,when I put it on it was fully compressed also and this was before I got the shock supports. Idk if stock would be worth buying until I...
Ok so what shocks are awesome for the front for the drop I have? Give me a exact shock to get because I need someone who has this setup and has tried them already! Plus I want a little comfort if I can get it,I don't care the price I just need it to work
Ok so shorter? I would of thought longer shocks so they wouldn't compress so much and leave some play room to move up and down,explain please,and what u mean too close together? Side to side closeness or the upper from the lower mount? And what do u suggest to fix it? I know I'm not the only one...
Drop issues
Out back I used a flip kit with the same shocks I have no issues with ride in the back just up front,I'm using nitro drop shocks for a 4-6 drop and they bottom out right when I lower the truck on the ground ,it's only coils and spindles up front no bags or anything crazy but they...
I did all the lowering on my c10 with every single brand new component available,I'm using CPP 2" lowering spindles,2.5" mccaughleys drop coils and nitro drop shocks. I'm using the shock supports up on the frame and relocated the lower a arm shock mounts to make it run more free and not bind up...