The truck came originally with a 6.2, and I took it out replaced it and when I put the motor back in I started loosing 12 volts. I checked the fuses and they were good. Does the wire to the injection pump go to the ignition switch in the steering column? Thank you for helping
I want to say thank you everyone for helping me on these problems in the past I have had and all the advice given. It's helped me alot. Currently I have the mechanical 6.5 diesel in the truck, but I am loosing 12 volts to the injection pump. The pump is brand new. Where does the 12 volts feed...
Okay I traced the red wire down and it was in great condition. I am now looking at the relay for the glow plugs. Maybe that is causing it to somehow loose power. And I'll work back from there. I also looked at all my plugs on the top of the injection pump. Everything is in the correct order. I...
I am in need of some help. I have e 1987 chevy 6.2 diesel and I am loosing 12 volts to the fuel shutoff on the injection pump. It runs for 30 seconds then cuts off. The solenoid reads 11 or 12v when running then it instantly goes to 2 volts and shuts-off. I am looking for a injection pump wiring...
I am looking to buy a round bolt hole adapter with threads on the passenger side for the pivot on the transfer case shifter. I hope someone can help me out on this
Thank you
Thank yall for the advice I ended up putting the thicker head gaskets on and put studs in it now going to look for a girdle for it. I plan on just pulling and driving it to work.
I currently am building a mechanical 6.5 that has the DB2 injection pump. I have 1/2 inch braided line I want to run to the injection pump with AN fittings. Does anyone know the size of the feeder line at the injection pump. I cannot find the size. I just find the hose size used. I hope someone...
I am rebuilding a 1997 6.5 diesel engine and I'm wanting to run a turbo that makes 20psi of boost. I found on quadstar tuning. I bought arp heads for it and I talked to a machinist that's doing the heads for me and he said I need to put a thicker head gasket on which idk what thickness or the...
I'm needing help with a mechanical 6.2 litre diesel and 4L80E to work together. I have a TCU waiting harness for a gas motor just needing help making it shift since there is no tach to tell it when to shift. Any advice would be great.