Craig Nedrow's latest activity
-
It should be a TBI 305,and a single wire O2 sensor,so it's going to have to stay fairly stock to run the TBI. That means no big cam,if... -
If you have a heated sensor it can be farther down the pipe, away from the exhaust manifold, since it does not rely on engine heat to...
-
On a 454 I'd want headers. I was thinking you were 305.
-
My autometer kit has a Bosch sensor and says they want it right after the manifold collector in the pipe. Or for headers, on the...
-
Craig Nedrow replied to the thread 80 sq body.I bought a Milwaukee buffer, best thing I ever bought for buffing, which is what I would do. Wax that thing, it will look awesome the...
-
-
You couldn't get a shortbed in a 3/4 ton. So it's either a K20 that's been cut down - or - (more likely) a K10 with 3/4 ton axles. K
-
I’d go ride that dirt bike first and then buff out the green paint then wax. Nice rides and good to be back home where it belongs.
-
My cousin bought this truck brand new and really wanted a 3/4 ton, at the time, our local dealership couldn't get one, so he basically...
-
Newbie here. I've owned this truck for 32 years, sold it and just bought it back. 454 4 speed granny 3/4 ton
-
Craig Nedrow replied to the thread 14bolt FF size vs 10bolt.Looks like a Dana, as it has the spreader holes, D60 fronts are rare, wish I had one too, so it is most likely a D44. Make sure it has...
-
No, the 8 lug caliper bracket is physically bigger.
-
For an 8 lug front, the hardest part to source will be the backing plate. No known aftermarket repops at this time. You’ll need a large...
-
You'll need an 8 lug version caliper mounting bracket. The 8 lug rotor is larger and the caliper mount will move the caliper out...
-
Rotors will need to be 8 lug rotors, they are a little larger than 1/2 ton 6 lug rotors are. Calipers should physically interchange but...
-
The “261” on the bottom of that tag denotes the low range gear ratio - 2.61:1.
