R
RaisedK5
Member From Memramcook, New Brunswick, Canada
- Joined
- Last seen
- Viewing thread SBC Cylinder Head Decision
Latest activity Postings About
-
-
RRaisedK5 replied to the thread Pulling Sucks--2001 Suburban 3/4 ton--6.0.I agree with most of the suggestions here regarding tune up parts. When I first got my 05 2500hd, thing ran like a scalded dog. After...
-
RRaisedK5 replied to the thread Rochester 4-bbl quadrajet idle on 1978 Chevy 1/2 ton.http://www.mediafire.com/download/zllpgm3mbsla6u3/ST_330_78_1978_Chevrolet_Light_Truck_Service_Manual.pdf Quadrajet starts on page 6C-33
-
RRaisedK5 replied to the thread No spark need help.I can't help but notice the orientation of the new distributor is different from the old. Are you certain the rotor is pointing at the...
-
RRaisedK5 replied to the thread truck runs hot.I'd put it in the intake manifold if you have an empty (plugged) hole. In the thermostat housing it will only register true once the...
-
RRaisedK5 replied to the thread Wiper switch connector wire colors and functions.Wireing diagrams are available in the reference library section of this forum.
-
RRaisedK5 replied to the thread 88 K5 anyone know where I can find the seals that go here?.https://www.lmctruck.com/1973-91-chevy-gmc/bed-tailgate/csb-1973-91-tailgate-and-components-with-removable-hardtop
-
RRaisedK5 replied to the thread 1977 C10 AC not working, solution suggestions.Looks like that one that is bypassed is the thermostatic switch.
-
-
RRaisedK5 replied to the thread Feels like front suspension 'bottoms out' over speed bumps..And those shocks are probably maxed out on length. Front blocks are a bozo-no-no, And are probably half the problem with your steering
-
RRaisedK5 replied to the thread Battery negative ground question..... again, sorry !.Looks like a perfectly good hole in the front of the driver side head.
-
RRaisedK5 replied to the thread Where does negative battery cable ground wire attach?.Here's the batt cable routing from 75. Note the headlight grounding screw location. That's where that broken one went.
-
-
RRaisedK5 replied to the thread Seriously bummed with this drivetrain setup right now :(.Not sure if anyone mentioned this but in all reality you want the rear pinion pointed a couple degrees down from directly at the t case...
-
-
Loading…
-
Loading…
