duece1951
Reaction score
43

Latest activity Postings About

    • duece1951
      duece1951 replied to the thread 85 vent windows.
      I just replaced both of mine and have the old ones painted and all the screws and gaskets to rebuild them. I got frustrated with trying...
    • duece1951
      You could try stripping all the paint back off the truck, to see if that helps. I mean, it worked before you painted it, right? Ha...
    • duece1951
      duece1951 replied to the thread Power Door Lock.
      My guess bad switch.
    • duece1951
      Put truck together yesterday. Drivers door will not unlock, it’s not the key cylinder or actuator. It physically will not unlock pulling...
    • duece1951
      duece1951 replied to the thread Bent fuel pump rod.
      New pump in and new rod as well. Started right up and runs way smoother than it did before. First time out of the garage in 7 months...
    • duece1951
      duece1951 replied to the thread Fuel pump.
      I ask only because that’s the exact thing mine started to do at that speed. Ran rough as well. Fuel pump died while sitting in the...
    • duece1951
      duece1951 replied to the thread Fuel pump.
      By lays down do you mean the truck seems sluggish and surges about 45-50?
    • duece1951
      duece1951 replied to the thread Bent fuel pump rod.
      I get the long short bolt exchange, I just was attempting to say I had not gotten that far to use that trick so no long bolt was ever...
    • duece1951
      duece1951 replied to the thread Bent fuel pump rod.
      Well the truck is an old farm truck and say go 20+ years in a barn in Georgia. Front of the engine has old oil and dirt all over it...
    • duece1951
      duece1951 replied to the thread Bent fuel pump rod.
      I think someone was in there at some point. The plate had no gasket behind it. At least found the oil leak issue! Thanks for the...
    • duece1951
      Has anyone experienced a bent fuel pump rod? Truck has been parked and apart for months. Always started prior, ran rough the last few...
  • Loading…
  • Loading…

Latest posts

Forum statistics

Threads
45,947
Posts
996,656
Members
39,141
Latest member
jbwhitford
Top