Search results

  1. duece1951

    85 vent windows

    I just replaced both of mine and have the old ones painted and all the screws and gaskets to rebuild them. I got frustrated with trying to get the gasket in placed. I watched videos and it’s able to be done I just took the easy way out.
  2. duece1951

    Power Door Lock

    My guess bad switch.
  3. duece1951

    Drivers door will not unlock all the sudden.

    Put truck together yesterday. Drivers door will not unlock, it’s not the key cylinder or actuator. It physically will not unlock pulling up the lock. I have the door apart and the cylinder out. Nothing seems to be blocking it. The actuator is new. Worked fine until til I painted it. But even...
  4. duece1951

    Bent fuel pump rod

    New pump in and new rod as well. Started right up and runs way smoother than it did before. First time out of the garage in 7 months. Thank you everyone for the input!
  5. duece1951

    Fuel pump

    I ask only because that’s the exact thing mine started to do at that speed. Ran rough as well. Fuel pump died while sitting in the garage. So we have the same issue with fuel delivery. I read that was a sign of them starting to fail. Thank you for the reply and makes my guess at the issue a good...
  6. duece1951

    Fuel pump

    By lays down do you mean the truck seems sluggish and surges about 45-50?
  7. duece1951

    Bent fuel pump rod

    I get the long short bolt exchange, I just was attempting to say I had not gotten that far to use that trick so no long bolt was ever used, by me. I the past from old owners no idea.
  8. duece1951

    Bent fuel pump rod

    Well the truck is an old farm truck and say go 20+ years in a barn in Georgia. Front of the engine has old oil and dirt all over it. Took the mounting plate off to get to the rod, no gasket. So that answers where the oil had come from. Enough years of oil and dirt roads stopped the leak. So if...
  9. duece1951

    Bent fuel pump rod

    I think someone was in there at some point. The plate had no gasket behind it. At least found the oil leak issue! Thanks for the responses! The bolt that “holds it in place to change it” was the short one so that was not the issue. Been searching on the internet and I have touched nothing prior...
  10. duece1951

    Bent fuel pump rod

    Has anyone experienced a bent fuel pump rod? Truck has been parked and apart for months. Always started prior, ran rough the last few months and the new fuel filter never completely filled with fuel as did the old. Went and purchased a new pump and while installing it I could not push the rod...
  11. duece1951

    Wanting Led upgrade throughout while keeping stock look... Recommendations?

    Amazon has many options. I did my 84 and they work great for the headlights. The dash is simple, they plug right in, spade bulbs, again Amazon. Side markers I choose black out led lights. Chrome came off in the sun in less then a year. So I will strip them and paint them black, the trim that is...
  12. duece1951

    Wanting an Upgrade

    I would also go with LMC. I had to replace a few of my interior parts that were broken. Fit was good and not too expensive. They are easy to work with as a company.
  13. duece1951

    New Guy with a 84 C10 Shortbed

    Welcome from SW Florida! I have an 84 as well.
  14. duece1951

    Hi, from west Texas.

    Welcome from SW Florida!
  15. duece1951

    New Old Guy with 76 C10 Shortbox

    Welcome from Sw Florida!
  16. duece1951

    Oil pressure gauge problem

    Mine did that exact same thing. I ended up running a new wire and soldered it on the top right prong where the pressure gauge hooks into the dashboard. My brown wire was gone so had no choice. 1984 GMC off the oil pressure sending unit behind the carb.
  17. duece1951

    Repopped Fender Badges-where to buy quality badges?

    I have looked all over and no one makes them. Only people that find them pay big money. I have a 84 C15 and went with a billet grill. Will attempt to find an emblem that will work.
  18. duece1951

    Repopped Fender Badges-where to buy quality badges?

    LMC for sure.
  19. duece1951

    Oil pressure sending unit on manifold 305

    Oil pressure gauge working. Ran a new wire. Thank you for all the ideas and help. Waiting on a new dash emblem and I can complete the interior, all new.
  20. duece1951

    Oil pressure sending unit on manifold 305

    I am not attempting to upset you. I appreciate your help and response. Have a nice evening. I am not a mechanic and this is my first attempt of building a vehicle. I bought it in the side of the road on a family trip due to turning 50. I have learned a lot and have it running and working other...
  21. duece1951

    Oil pressure sending unit on manifold 305

    I did. Now I have 3 wires going to a place that should have 2 wires
  22. duece1951

    Oil pressure sending unit on manifold 305

    Is this where they come out of fire wall?
  23. duece1951

    Oil pressure sending unit on manifold 305

    more pics
  24. duece1951

    Oil pressure sending unit on manifold 305

    Have 3 wires to lower sensor by oil filter.
  25. duece1951

    Oil pressure sending unit on manifold 305

    My sensor by the oil filter has 3 wires. The rest are the unplugged wires from whatever was cut out. Is it possible they put in the wrong sensor by the filter and it’s a 3 wire and I have to change that and take one of those wires and attach to the awning unit on the manifold? I know a brown...

Latest posts

Forum statistics

Threads
45,950
Posts
996,723
Members
39,148
Latest member
luke205
Top