ChuckN
Latest activity Postings About
-
-
ChuckN replied to the thread Front spring question.That’s good stuff right there. Thanks bud! I reckon it’s gonna be a beautiful day here in town, sounds like a cruise down to Hardware... -
Homemade version if you make one. Drill the heads of the bolts with a large bit to make a divot on the heads. to keep from walking off...
-
ChuckN replied to the thread Front spring question.Perfect!
-
This is what I was telling you how to make out of 2 bolts and a coupling nut...
-
ChuckN replied to the thread Front spring question.I’ll put yours and @Ricko1966 suggestion in my back pocket. Those are great ideas. At this point I’m actively practicing walking past it...
-
ChuckN reacted to TotalyHucked's post in the thread Opinions on best newish Suburban or Tahoe with
Haha.
An old bench seat thrown in the back, BOOM 3rd row :anitoof: -
Fine thread is better than coarse as well but moreso in durability if using the tool repeatedly under a load.
-
This, i have an old piece of shaft that I got from the scrap barrel at work. Drilled it to fit some M12 bolts (that's what we had in...
-
^This. The only trucks that are dead nuts level are on coilovers since they have easy, minute adjustability. That's one thing I love...
-
Or a fat passenger. Everybody leaves that one out.
-
Huck got most of your questions answered it seems. If you pay attention at shows all these trucks lean one way or another. Just try...
-
ChuckN replied to the thread Front spring question.I’ll run to the hardware store and talk to the guys. They have rows of stuff there. I’m sure they can help me out something together...
-
I'd try 2 bolts screwed into a coupling nut. Use them as a wedge to push on the lower ball joint stud leave the ball joint nut on but...
-
ChuckN replied to the thread Front spring question.Good to know. It’s hard to see up in there with the spring still in. I tried to get the lower ball joint out this afternoon, but it...
-
I'm the same way, my truck sits ~3/8"-1/2" lower on the pass side front, just cuz I didn't cut the springs the same and have never fixed...
-
-
Loading…
-
Loading…
