R
RaisedK5
Latest activity Postings About
-
-
RRaisedK5 replied to the thread Where to get quadrajet rebuilt?.How to Rebuild & Modify Rochester Quadrajet Carburetors (S-a Design) https://a.co/d/3vTd7km
-
RRaisedK5 replied to the thread Wrong brake calipers?.Also check the brake line hole. Early calipers 73-77ish should be a 7/16" banjo bolt. After 78ish should be 10mm.
-
RRaisedK5 replied to the thread Fuel return help needed.Driver side line is to the Evap can on the core support.
-
RRaisedK5 replied to the thread A/C Condenser Mounting Insulator.They should just be well nuts. Available in the weird hardware and assorted dodad drawers of any decent hardware store. ACE or True...
-
-
RTo be more like factory it should have keyed power to an oil pressure switch to the choke so if you have the key on without the engine...
-
RRaisedK5 replied to the thread WTF horn issue.Download this PDF. And skip down to page 56 or 57. That will show the assembly of the upper tilt in real pictures. Hope it helps id the...
-
RRaisedK5 replied to the thread Break Lines for 6 inch Lift Front.https://www.summitracing.com/parts/sja-fbl19
-
RRaisedK5 replied to the thread Help with the name of this part and what does it control..I believe that is the EFE valve. Basically a vacuum actuated exhaust valve that's part of the emissions system. See below.
-
-
RRaisedK5 replied to the thread What new tools have you got lately?.Is there a tools you didn't want to buy but had to thread??
-
-
RRaisedK5 replied to the thread 87 blower motor.I thought we solved this months ago. Hope this helps:
-
-
RRaisedK5 replied to the thread Quadrajet Choke missing?.Yes. Your choke is missing. This might get you started but it will need a rod and works better with the little cover. Might have to hit...
-
-
RRaisedK5 replied to the thread 700r4 overdrive?.Not an expert on the 700r4. But I do know that the TV cable is vital to the survival of that transmission. If you replaced the...
-
RRaisedK5 replied to the thread Need an electrical (220v) second opinion.Do we have a quote of the day thread??
-
RRaisedK5 replied to the thread Have i decoded this VIN correctly????.That's exactly right.
-
RRaisedK5 replied to the thread Have i decoded this VIN correctly????.Nope. Those are K30 axles. Well, to be more accurate the front is a K30 axle. The rear could be a K20 14 bolt or a K30 14 bolt. If you...
-
-
Loading…
-
Loading…
