Mike B. Yes the pistons came with oil support ring.
So I just got the truck going tonight finally. Skoots pretty good until ya gotta shift... the 4 speed is a good upgrade for now since the old th350 was getting weak. Hopefully a nice th400 with gear vendors od is in the future. Happy so far...
Wow guys thanks for the info. I didn't even realize I got so many replies. So I ended up ordering a full scat rotating assembly with 6.0 rods cast crank and hyputectic pistons. Static compression will be 10.2:1. Yes the block is getting decked. I'm going to use a .039 gasket and that will leave...
Well I'm trying to find the right or perfect cam for my 400 small block build. My 350 decided to dump all the coolant in the oil. I ended up with a cracked block and a bad crank. So I'm starting over with a 400 I picked up. Trying to get my truck going on a budget but without cutting corners. So...
Anything special I need to know about setting up the clutch? I plan on running a hydraulic clutch. All new parts for a 83 k30 diesel. Master, slave and clutch.
Thanks for the info guys. I kept looking around and found a 465 with a 205 mounted to it that was pulled out of a 83 k30 diesel for $400. I might just go get that. Good deal? That would be a 10 spline still right?
So I found a 10 spline 465 for $50 and a 10 spline input shaft for sale but the price was not posted. I checked with a local parts yard and I can get the 8 bolt to 8 bolt adapter for $80. Other than that I need the sleeve between the two? Or should I look for a 6 bolt np205? And what is a...
Yes my 205 does have the 8 bolt pattern bolted up to a (I believe) a round six bolt pattern th350. If I could get a 32 spline input for the 205 how hard are they to swap out. In just looking at my options. Thanks for the replies.
Hey guys new to the forum. Looking for some info on mating the Np205 I currently have behind my th350 to a sm465 a friend of mine has. What I have gathered so far is my t case input is a 27 spline input shaft and the sm465 I'm 90% sure it has a 32 spline output. The sm465 is out of an 88 k1500...