1987 R10 Fuel Tank Shield

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

tmwork

Supporting Member
Supporting Member
Joined
Jun 29, 2026
Posts
1
Reaction score
0
Location
DFW
First Name
Tim
Truck Year
1987
Truck Model
R10
Engine Size
305
I have an 87 R10 with dual 16 gallon tanks. I need a fuel tank shield for the driver side tank. Anyone know where I can find one? It's #8 in the diagram
 

Attachments

  • 9950FE5F-3DAE-485C-8C1C-867A24F9831D.jpeg
    9950FE5F-3DAE-485C-8C1C-867A24F9831D.jpeg
    121 KB · Views: 25

84GMCSierra

Supporting Member
Supporting Member Air Force
Joined
Feb 26, 2023
Posts
571
Reaction score
741
Location
Central Arizona
First Name
Paul
Truck Year
1984
Truck Model
C2500
Engine Size
350
Couple of questions: is it the plastic cover? Do you drive your truck daily? I ask as several of us have ditched them because they hold dirt and debris which can lead to rot and damage to the tank(s). I had the tank on my old 65 Chevy II Nova sprayed with bedliner. Protected it and unless you really looked, it wasn't noticeable.
 

Gander

Full Access Member
Army
Joined
Aug 27, 2025
Posts
160
Reaction score
180
Location
Dirty Bay, TX
First Name
Lawrence
Truck Year
1987
Truck Model
V10
Engine Size
350 TBI
Couple of questions: is it the plastic cover? Do you drive your truck daily? I ask as several of us have ditched them because they hold dirt and debris which can lead to rot and damage to the tank(s). I had the tank on my old 65 Chevy II Nova sprayed with bedliner. Protected it and unless you really looked, it wasn't noticeable.
I have an 87 R10 with dual 16 gallon tanks. I need a fuel tank shield for the driver side tank. Anyone know where I can find one? It's #8 in the diagram
You really don’t want to run those full covers. As someone else already pointed out, they’re a poor design. They trap water/mud/dirt and hold it right up against the bottom of your tank which ends up rusting your tank out.

Earlier year trucks ran a partial shield on the leading end of the tank. I found a set of those and put them on. Even with them it would be a good idea to drill some drain holes in them before installing them.
 

78C10BigTen

Full Access Member
Joined
Apr 12, 2017
Posts
18,283
Reaction score
33,596
Location
pennsylvannia
First Name
Ted
Truck Year
1978
Truck Model
C10 BIG TEN
Engine Size
350
You really don’t want to run those full covers. As someone else already pointed out, they’re a poor design. They trap water/mud/dirt and hold it right up against the bottom of your tank which ends up rusting your tank out.

Earlier year trucks ran a partial shield on the leading end of the tank. I found a set of those and put them on. Even with them it would be a good idea to drill some drain holes in them before installing them.
The partial ones do the same thing, my 91 s10 rotted out on the nose of the tank behind that cover. Granted it took 34 years lol
 

Broken85

Supporting Member
Supporting Member
Joined
Jan 14, 2024
Posts
313
Reaction score
450
Location
Cumberland, NJ
First Name
A
Truck Year
1985
Truck Model
K10
Engine Size
350
GM gave rock shields out for free so they could sell more $100 gas tanks.
 

Latest posts

Forum statistics

Threads
48,679
Posts
1,074,523
Members
43,366
Latest member
76Dump
Top