Latest activity
-
nvrenuf replied to the thread Headers and exhaust for a V3500.The only thing I can think of is a vertical sheet metal gusset that runs down the outside of the upper floor pan and turns under the... -
brooksman9 replied to the thread What have you done to your square lately??.Got it from Summit. About $42. Can't really tell much difference noise wise but haven't really driven this truck any either. It looks... -
Goldie Driver replied to the thread Rear Brakes Locking Up.Well, let's assume the valve is good. Maybe a silly question, but are the longer shoes on the rear ? Rear is the secondary shoe... -
DDrap replied to the thread Headers and exhaust for a V3500.It is just on the firewall. It looks like a bracket, attached to the firewall on both ends, but doesn't support anything.It is about 3"...
-
Art Vandelay reacted to Ricko1966's post in the thread Good Ospho (phosphoric) and epoxy Test with
Like.
Read SPIs info on sanding phosphoric acid treated metal. As for the person asking about spraying phosphoric acid on clean metal. Yes you... -
RRicko1966 replied to the thread Brake Fluid Flush GMT800.It's also not a frozen caliper,a stuck slide or a frozen wheel cylinder causing your low pedal,assuming you have single piston calipers...
-
Eedgephoto replied to the thread Brake Fluid Flush GMT800.I am with @Ricko1966 on this. I have never seen a swelling brake hose in my 40 years in the service business. Plenty of internal issue...
-
TI'm getting my rear diff ready and I need to get parts. I'd like to know if anyone prefers the 3:42 over the more common 3:73 for...
-
Jjminor replied to the thread 80' fuse box diagram,,,,,.Perfect. Thanks for making the steps clear and simple. I have found the issue and fixed it. I appreciate all of the time and help.
-
Jjminor replied to the thread 80' fuse box diagram,,,,,.Tailight fuse. Yes, I was testing with the fuse installed. Since then, I have found the issue. I appreciate the time and help.
-
JWhich fuse? if you are testing the actual fuse while it is plugged into the slots- yes. If you are testing the individual slots by...
-
JBefore doing anything, push and pull the hazard switch a few times. Sometimes that cleans the contacts and gets troublesome lights...
