Art Vandelay
Latest activity Postings About
-
-
Art Vandelay replied to the thread POR 15 equivalents?.I redid my tanks. With both I sanded down and hit with Rust Kutter (works great) then one I primed with SW Fastline which was not good... -
Art Vandelay replied to the thread Cab repair stabilizing.This is as much as I cut before starting this thread.
-
-
It probably fell out of the cab corner area like a bunch of other junk when you go to removing the rotten metal...
-
On my 79, the outer rockers while rusty, were still structurally sound, I cut out the remainder of the floor and inner rockers and kick...
-
Art Vandelay replied to the thread Cab repair stabilizing.Interesting how in a lot of the YouTube videos they don’t brace and cut out both sides.
-
This is what I made for my K5 body...used thick walled square tubing.
-
That's a dam good idea,I never thought of it and never had a problem,but if a person welded angle across both door openings and then...
-
When I cut out major sections like rockers etc. I weld angle iron across the inside of the door opening as low as I can and still be...
-
Cab is currently on a rotisserie (which is awesome). I will begin the cutting and replacement of floor, rockers and kick panels (one...
-
That would be good in this case. Pickups were mechanical oil pressure gauge through '77.
-
So I came a across a cluster with the combined 5k RPM tach and gas gauge on right and with Oil, Temp(100-250) , Vac and Amp. So correct...
-
-
Loading…
-
Loading…
