Latest activity
-
I'm the same way, my truck sits ~3/8"-1/2" lower on the pass side front, just cuz I didn't cut the springs the same and have never fixed... -
Hey, don’t talk about my wife like that.
-
You’re speaking my language. I just got a 3/8” spacer off scamazon, which by all reports means roughly translated .75” correction, and...
-
Or he could get a fat passenger. Just thinking out loud here.
-
Ya tough call. If the truck is otherwise straight then you could put a little coil spacer in the saggy side and see how it looks. 1/2”...
-
Welcome from Missouri.
-
GGpaw44 reacted to Tonimus's post in the thread Replacing the ignition module with a MSD box with
Like.
Still needs a MSD 8861 module bypass harness for 4 pin modules. -
HHotWheelsBurban reacted to scenic760's post in the thread 1977-78 door trim accent piece - Western Scroll with Like.
The sad part is that Burb will probably be smashed and sold for scrap within a week… There was an ‘84 in the same yard with a great...
-
HHotWheelsBurban reacted to edgephoto's post in the thread Searching for My Dad's 1979 Chevy Suburban with Like.
That speedo gear is not what I am used to seeing but I never played with trucks much in the old days, only cars. A little searching and...
-
HHotWheelsBurban reacted to TheHoundsman's post in the thread Searching for My Dad's 1979 Chevy Suburban with Like.
Will do. The steering shaft was relatively easy once I had the correct u joint for my steering column. Blue Loctite is a must to be...
-
HJust slow, and hold it all the way down until both bleeder screws are closed. Be sure to make sure that the fluid level in the...
