Latest activity
-
RiverRat4 replied to the thread 81 K10 fuse panel layout.Ok here’s the fuse panel. What do these 4 fuses up here do? Im pulling each and seeing what shakes out. So far one out and nothing... -
-
83Stepper replied to the thread Rear Brakes Locking Up.That's right, rear of the master feeds the front brakes and front of the master feeds the rears. Check to make sure your proportioning... -
AAndronikos replied to the thread Rear Brakes Locking Up.Yes, I have my doubts about new valves too. The way you mention about re-centering the valve is how I bled the rear brakes. Wouldn't...
-
AJust my .02 from personal experience, but I would not change the valve as your replacement is going to be Chinesium. If you do change...
-
AAndronikos replied to the thread Rear Brakes Locking Up.I have the rear port of the master, the small line, feeding the front brakes, and the front port of the master feeding the rear brakes...
-
ASounds like either the proportioning valve, or you got your lines crossed somewhere between the master cylinder and proportioning valve...
-
I guess I just don't understand then. I've pulled the same loads I described earlier with dually trucks and also C4500's. It's not much... -
Well most all of you already know i tow and haul. For the sake of the spirit of this thread I'll give an over view. Up until last fall...
-
I think the WD hitch benefits are more pronounced with higher profile loads that act like a sail. I think I can feel my small bumper...
-
Unfortunately dad's old C20 Crew with almost 50 years of fighting gravity & 400K miles isn't gonna be hauling much until I can address...
-
In fact, this set up crossed the Rockies when we moved from Michigan to Arizona - K
-
Mine was a daily for 30 years and 200000 miles. Light hauling, trailering, and back and forth to work. It's what they were made for...
-
I drive what looks like a clapped out, rusted 80 GMC K15 almost everyday, hauling firewood, haybales, rock, etc. I take it to swap meets...
-
My ol' girl has to earn her keep!
-
Here's my...my dad's C20 Crew pulling a 28' camper in the early 80's. He didn't kill it but from memory it pulled fine. 350/SM465 &...
