windshield wiper wiring

[streetrod don]

I am building an 86 Blazer. Scotts suspension, LT4. I am using an Ididit column which does not have a wiper switch. When I removed all of the old wiring i saved the connectors for the wiper motor. I have an American Auto Wire 2 speed switch and will not be using a washer. I need a diagram for the 5 wires on the wiper motor. thanks Don

 

[Doppleganger]

Something like this?

https://www.gmsquarebody.com/threads/85-91-wiper-motor-rebuild.36321/page-2#post-747399

 

[streetrod don]

That would be an excellent diagnostic diagram but I need a diagram showing the wire runs from a switch to the wiper motor.

 

[Snoots]

ST_352_86_1986_Chevrolet_GMC_Light_Truc_Wiring_Manual_CK_10_30_Only

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

 

[Doppleganger]

I know that the harness from the wiper motor runs to the main gang connector. If THAT harness is bad, I will see what I have duplicates of as I collected them (and new connectors) to remake a new harness from the motor to the connector. That was one sub harness I never saw anyone make.

 

[Snoots]

Correct me if I'm wrong but if you had pulse wipers there was a separate harness that ran thru the firewall to the motor.