Ricmond84chevy
Junior Member
- Joined
- Nov 16, 2013
- Posts
- 8
- Reaction score
- 0
- Location
- Meeker
- First Name
- Richmond
- Truck Year
- 84
- Truck Model
- C10
- Engine Size
- 350
Needing some help wondering if anybody knows how to fix my problem. I currently re wired my whole 84 c10 with a Painless harness everything works just like it should. My tail lights are shaved and the only system of tail lights and blinkers for the rear is my line of fire. My blinkers work for both sides but once I hit the brake the turn signal shuts off then comes back on when I release the brake. I also replaced the turn signal flasher with a painless flasher that is specifically made for LED lights and turn signals. The front turn signals work fine also. Every single ground on my truck has been replaced and my line of fire is grounded out just fine. Some posts on google were saying to add a ground wire so it can support the electrical system so it can support both turn signal and brake light when but how do I go about that? Thank y’all and hope somebody knows how to fix this. This is literally the only thing that’s holding my truck back and it’s frustrating as hell lol.