colonel
Junior Member
- Joined
- Mar 3, 2013
- Posts
- 13
- Reaction score
- 0
- Location
- SWFL
- First Name
- Alex
- Truck Year
- 81
- Truck Model
- C10
- Engine Size
- Cammed 454
My C10 is sagged at the driver side rear end. It´s about 3/4 of an inch lower than on the passenger side which doesn´t sound a lot but it bothers me. Especially now, that the truck is lowered it´s become pretty obvious.
I am certain there may a number of reasons for this. However, found out that after installing a flip kit and the rear shock extenders the left shock bottomed out, allthought everybody - including the vendor and a number of forum members - stated that this was uncommon. When I measured the shock mounts on both sides (to get shorter shocks) it showed that the driver side gab between upper and lower mount is about 3/5th of an inch shorter than the passenger side.
Now, I do have a certain idea about what may be the reason but I would like to hear opinions - and what to do to correct this.
I am certain there may a number of reasons for this. However, found out that after installing a flip kit and the rear shock extenders the left shock bottomed out, allthought everybody - including the vendor and a number of forum members - stated that this was uncommon. When I measured the shock mounts on both sides (to get shorter shocks) it showed that the driver side gab between upper and lower mount is about 3/5th of an inch shorter than the passenger side.
Now, I do have a certain idea about what may be the reason but I would like to hear opinions - and what to do to correct this.