Piece of metal in oil pan

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ScottyB

Full Access Member
Joined
Aug 28, 2013
Posts
1,067
Reaction score
1,098
Location
Whatcom County, Washington
First Name
Scott
Truck Year
1800
Truck Model
phantom
Engine Size
2 squirrels
Pre. Just before the metal stretcher had its way with it.

Then you'll need a left handed oscillating screwdriver to reinstall the bearing. You don't want to wing it on muffler bearings or it will throw off you exhaust harmonics leading to resonating backflow that can fracture the flux capacitor. If that happens you may need to rebuild your neighbor's VCR to bring things back in phase.
 

foamypirate

Full Access Member
Joined
Jul 30, 2010
Posts
3,302
Reaction score
456
Location
Central TX
First Name
Jake (Mr. Wilson)
Truck Year
1980
Truck Model
El Camino, baby!
Engine Size
5.3L/4L60E
Then you'll need a left handed oscillating screwdriver to reinstall the bearing. You don't want to wing it on muffler bearings or it will throw off you exhaust harmonics leading to resonating backflow that can fracture the flux capacitor. If that happens you may need to rebuild your neighbor's VCR to bring things back in phase.

Not to mention the risk of damaging the turbo encabulator... It's discontinued, and all the ones in the junkyard are usually shot.
 

Forum statistics

Threads
43,936
Posts
946,048
Members
35,982
Latest member
jake26104
Top