Pic of the clutch rod on a 4 speed where it goes through the floor, I replaced my floors and need to drill the hole for the clutch rod. Much appreciat

[Gman73]

Pic of the clutch rod on a 4 speed where it goes through the floor, I replaced my floors and need to drill the hole for the clutch rod. Much appreciated

 

[Termite_Delight]

 

[CalSgt]

Looks to be immediately below the gusset plate for the column/brake booster and just to the right of the bolt.

You must be registered for see images attach

You must be registered for see images attach

 

[Gman73]

Thank you so much CalSgt that's exactly what I was looking for.

 

[Beanz2019]

I believe there are 3 divits or small indentations on the inside firewall just under the cut out for steering. They are at a slight angle. The two outside indentions are for fasteners and the middle one is for you center hole that I think is 2" in diameter. These should help with alignment/positioning.

I could be mistaken though.

 

[Gman73]

Got it thanks all