Newbie Transfer Case Identification Help

[highdesertrange]

did I mention I hate slip yokes on 4x4s. put a fixed yoke on it and be done with it. highdesertranger

 

[jastewart25]

thank you all for your help.

i finally found an extension housing in chicago.

 

[MadOgre]

thank you all for your help.

i finally found an extension housing in chicago.

Take it to a shop preferably a gear shop and have them press in a new bushing for you. Its just worth the $50 not having the hassle. Buddy probably broke it in the first place trying to put one in himself.

 

[kleedus]

I have a slip yoke tail shaft housing for a 205 I took it off and put a fixed yoke on


that's what I recommend you do but if you end up needing a tail shaft housing I have one

 

[jastewart25]

I have a slip yoke tail shaft housing for a 205 I took it off and put a fixed yoke on


that's what I recommend you do but if you end up needing a tail shaft housing I have one

appreciate it. sadly, i purchased one already. i'm not mechanical at all but learning.

could you explain what the benefit of changing it to a fixed yoke would be? i'm not even sure what it does.

thanks!

 

[jastewart25]

Take it to a shop preferably a gear shop and have them press in a new bushing for you. Its just worth the $50 not having the hassle. Buddy probably broke it in the first place trying to put one in himself.

the one i found in chicago was hot tanked with a new seal and bushing included.

thanks for advice though.

 

[kleedus]

this is a fixed yoke 205

it is stronger

 

[jastewart25]

this is a fixed yoke 205

it is stronger

nice. thanks. i'll look into that in the future.

i just picked this truck up from a po and it needs a good bit of tlc so i have to prioritize for sure.

a good test in patience.

 

[Gsub]