How much is this stuff worth?

[Austin86K10]

I don't have any pictures at the moment but I just removed my TH350 trans and NP205 transfer case from my 1986 k10. The 350 trans has a B&M or TCI (can't remember) torque converter on it, according to the part# on the converter, it's a 5000+ stall when I looked. Everything is low mileage. I've had the truck since 2010 and everything was rebuilt when I purchased it. Ive put about 500 miles on the truck in the past 2-3 years. Always garage kept. Trans has a shift kit installed. I'm just wondering what these are worth? Everything is clean and painted and shifts correctly, 4x4 worked fine.

-Late 70's TH350 with shift kit
-Late 70's NP205 with adapter
-Yoke style front drive shaft NP205 to corp 10 bolt.
-All shift linkages, etc.
-5000+ stall converter

Any help would be greatly appreciated. I'm not looking for offers, just suggested selling prices. The picture was before I sandblasted the frame and axles, KBS coated them, painted the engine and 700R4/NP208. Thanks for your help

 

[spenser21]

I don't have any pictures at the moment but I just removed my TH350 trans and NP205 transfer case from my 1986 k10. The 350 trans has a B&M or TCI (can't remember) torque converter on it, according to the part# on the converter, it's a 5000+ stall when I looked. Everything is low mileage. I've had the truck since 2010 and everything was rebuilt when I purchased it. Ive put about 500 miles on the truck in the past 2-3 years. Always garage kept. Trans has a shift kit installed. I'm just wondering what these are worth? Everything is clean and painted and shifts correctly, 4x4 worked fine.

-Late 70's TH350 with shift kit
-Late 70's NP205 with adapter
-Yoke style front drive shaft NP205 to corp 10 bolt.
-All shift linkages, etc.
-5000+ stall converter

Any help would be greatly appreciated. I'm not looking for offers, just suggested selling prices. The picture was before I sandblasted the frame and axles, KBS coated them, painted the engine and 700R4/NP208. Thanks for your help

not sure what its worth but ill give ya 100 bucks for it

 

[Austin86K10]

Take me out to dinner first before ya bend me over

 

[MikeB]

I'd say a good clean TH350 is worth $300-$400 if you can honestly tell a buyer that it worked well. But if it's got a manual valve body, or even one with bam-bam harsh shifts, well that's going to appeal to a different buyer and might be worth more. But it may be worth nothing to the guy looking for a near stock trans.

5000 RPM stall converter? Are you sure? Is it a small diameter like 10"? When you drove the truck with that transmission, did it always seem to be slipping, and let the engine rev to 2500-3000 RPM before the truck would even start to move?

 

[87scotty]

Interested in your 205

 

[spenser21]

Take me out to dinner first before ya bend me over ��

Ill throw in a box of Cheez-it's

 

[Georgeb]

Ill throw in a box of Cheez-it's

White cheddar?