Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
These?
You must be registered for see images attachYou must be registered for see images attach
Work from engine side.
Coat the part that extends through the FW liberally with grease/Vaseline/oil.
Use a pair of needle nose to squeeze the point and, while squeezing, push it through the FW.
They are surprisingly durable and should survive the change out if removed in this manner.
If you try to pull them into the cab from the button side - all bets are off.