Braces between 700r4 dust cover and motor mounts on a 1987 V10 pickup

[Gander]

Edit: found a set. Should have them in my hands and on the truck late next week.

Changed the trans filter on my 1987 V10 today and noticed that it’s missing the struts that run from the trans to the motor mounts. Anyone got a pair of them they could part with?

 

[Ricko1966]

Changed the trans filter on my 1987 V10 today and noticed that it’s missing the struts that run from the trans to the motor mounts. Anyone got a pair of them they could part with?

Do you have the plates under the motor mounts that the struts attach to,and the proper dust cover that the struts bolt to?

 

[Gander]

Do you have the plates under the motor mounts that the struts attach to,and the proper dust cover that the struts bolt to?

I do, I was just under there yesterday changing the trans filter and saw the cover, checked later last evening and the plates are at the mounts. Just need those 2 struts and if you’ve got the bolts/nuts/washers I’d appreciate that too. Let me know how much with shipping to 77520 and thanks! It’s a 1987 V10 shortbed 350TBI/700R4/NP208, don’t know if they made different lengths over the years or for various configurations but that’s the combo I’ve got and I’m definitely missing those braces.

 

[Gander]

OK, I found a set. Missing some hardware, though. Anyone know what size nuts/bolts/washers at the motor mounts and at the trans cover so I can go to the hardware store and pick them up?