83 K10 intermediate shaft seal

[Mike8393]

I'm looking for an intermediate shaft upper seal for my 83 K10. Can someone point me in the direction where I can get one? It's 2.5" in diameter. Ebay is full of the 2.25" diameter seals for passenger cars. Any assistance would be appreciated. Thank you!

 

[PrairieDrifter]

Steering box input shaft seal? Rockauto

 

[Mike8393]

I appreciate the response but that looks like it's the seals to the input shaft on the gearbox itself. The shaft that the intermediate shaft coupling attaches to. Correct me if I'm wrong.

 

[squaredeal91]

I just did both my steering box shaft seals. I got 2 kits to do it all. 1 for input shaft seal. 1 for output shaft (pitman arm shaft) seal
The pitman arm kit comes with 2 seals because they are stacked inside with 1 washer in between the 2 seals and 1 washer on top below the clip.

 

[squaredeal91]

I appreciate the response but that looks like it's the seals to the input shaft on the gearbox itself. The shaft that the intermediate shaft coupling attaches to. Correct me if I'm wrong.

Yes,Thats the input shaft. Wish I still had those part numbers. They had them in stock at the parts house.