4x4 guys with a 73-76 front axle and steering,

[Swims350]

Anyone with a D44 and has the one long tie rod one short, can you please do me a favor, if yours has the hole in the long tie rod, more towards the middle, not way over near the actual knuckle end, can you measure and tell me where the hole is away from the knuckle end of the same long tie rod?

Also post pics if ya can.

 

[hirschdalechevy]

Mine is a 1974 k-20 , dana 44 , and it has the long tie rod from the drivers side and a little short one on the pass side and the tie rod sits on top of the knuckle arms , nuts on bottom and pulling a tape from the center of the tie rod bolt , (drivers side) , to the center of the hole in the middle of the tie rod was 27 3/8 inches , sorry my camara is dead. If you need pics I can get them later if need be , let me know

 

[Swims350]

sure man love seeing pics but no rush the measures help alot. and thanks for posting.

 

[hirschdalechevy]

I will try tomorrow

 

[hirschdalechevy]

Got some

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach