frankenstien
Full Access Member
- Joined
- Dec 27, 2015
- Posts
- 53
- Reaction score
- 1
- Location
- Fairbanks
- First Name
- mike
- Truck Year
- 1974
- Truck Model
- 1500 Sierra Grande
- Engine Size
- 383 CUI
long story short, my 285's are wore out, they were stretched on 7'' rims, looking to go up to 315's to match my 4.56 gears,
found a guy with good used set of 6 315/70/17 load range E's with 60% tread, its a pretty good deal
i need to get wheels anyways, looking at some pro comp 17x9 with 0mm offset 4.5'' back spacing,
the lift is a rancho springs in the front, ORD shackle flip in the back, its on a 1974 k10 with 3/4 ton springs and axles.
ive seen lots of 4'' trucks with 315/35's just not sure how offset effects these trucks
any pics of a similar setup or suggestions welcome, should fit ok?
found a guy with good used set of 6 315/70/17 load range E's with 60% tread, its a pretty good deal
i need to get wheels anyways, looking at some pro comp 17x9 with 0mm offset 4.5'' back spacing,
the lift is a rancho springs in the front, ORD shackle flip in the back, its on a 1974 k10 with 3/4 ton springs and axles.
ive seen lots of 4'' trucks with 315/35's just not sure how offset effects these trucks
any pics of a similar setup or suggestions welcome, should fit ok?
