help me grand wizards

  1. Hansrasmussen007

    Help with identifying Chassis Number Stamp

    Hey, new here and I have my VIN here: 1GCEK24C3CJ125556 So here's the Number stamped on the chassis I found when I pulled everything off to redo the frame and continue my 6.2l "re-swap" : C6J152559 So the story is the truck was restored in its life time and had a donor truck so idn if the cab...
  2. Zayshley

    “Clacking” noise at low speeds and Bad Vibration at 80km/h that goes away at 108km/h.

    Been having this issue for a while and I’m not quite sure what it is. Originally thought it was a bad rotor since it’d slow up at a certain point when rotating through the caliper but after replacing it, and the wheel bearings up front, the noise and vibration is still there. Not sure if it...
  3. 86SquaredUp

    86 Sierra cuts off while driving. Seems to flood.

    1986 Sierra Classic. All original. 305, TH350, M4ME Quadrajet. This truck sat for around 2 years before I bought it. Fuel tank was empty when I got it. I changed the plugs and wires, changed the oil, filled the tank, replaced the battery, and it fired up. It ran great for 2 months and then one...
  4. BiggerBen

    Trying to find the connector to turn off service engine

    just got done replacing all the gaskets on my square looking for the timing connector so I can time my truck properly I have a 87 if anyone could show me a diagram or anything any help would be appreciated a 17 year old just trying to get her done and back on the road

Latest posts

Forum statistics

Threads
42,147
Posts
910,128
Members
33,644
Latest member
Hoss1
Top