Search results
-
Should i put an clutch fan on?
Okay so my truck currently has a direct drive fan, no clutch And i found a clutch fan today digging around in my dads barn. seems to be in good working order. Should i put in on my truck? Is there really any advantages to having a clutch fan?- Bman
- Thread
- Replies: 21
- Forum: Engine & Performance
-
Temp gauge not reading right?
So I installed a new sending unit alittle while ago with a 180degree thermostat. The gauge is working fine, but I think its reading wrong? when warming up the gauge goes up to just below 210 on the gauge, but when the thermostat opens it drops back to the second tick mark on the gauge...- Bman
- Thread
- Replies: 4
- Forum: Gauge, Speedo & Instrumentation
-
oil pressure gauge unit?
Okay so ive looked into this and im confused. I have the full gauge cluster. Oil, temp, volts, clock. and all works but the oil which is pegged at 60psi. I looked into getting a new sending unit for the motor (which is out of a g20 van) and i don't know weather the unit on the...- Bman
- Thread
- Replies: 3
- Forum: Gauge, Speedo & Instrumentation
-
Brake light coming on?
Okay so for the longest time the brake light was always on in the truck. just yesterday i replaced the front calipers and pads and tried to bleed everything. well the fronts bled fine, but when doing the rears the steel line blew out. So After get lines and replacing the line i bled them... -
Power window just wont.
So ive got at the motor. this is passenger side tested it with 12v. it works both ways. up and down. The only visible issues with were a power wire to the motor was broke from the little boot that connects to the switch. and the switch was junk. so i fixed both issues. Well with...- Bman
- Thread
- Replies: 6
- Forum: Electrical & Audio
-
look what i found today!
In the famous words "Well theres your problem" -Mythbusters So i started off I knew the timing on my engine was off quite badly. just gonna check the timing of my engine. so i got the light and went to it. Well timing is right at 4 Degrees BTDC like its supposed to be. And i...- Bman
- Thread
- Replies: 9
- Forum: Engine & Performance
-
Hello! First time square body owner here!
Hi everyone. Ill start off saying Im New and first time square body owner, first GM vehicle for that matter. My names Ben, but growing up i was called Bman so it stuck. hence the Name. Im 18 just getting ready for college. Im decent with mechanics and electronics. i grew up doing it all the...- Bman
- Thread
- Replies: 36
- Forum: Introduction
-
Power door locks not working?
My 83 sierra classic has power windows and locks. Driver window works. passenger im sure the motor is shot/ switch is unhooked. I was wondering why my door locks didnt work at all. neither door. neither switch. no noises or anything. whats the likely hood that both actuators are...- Bman
- Thread
- Replies: 11
- Forum: Electrical & Audio
-
Brake light stuck on?
Hi. I have a 1983 GMC sierra classic 1500. and the BRAKE light is stuck on. Ive checked the forum and read a bit about this. Well in my case it was on when i got the truck. The brakes at that time were good, but alittle low on fluid, and the parking brake was held to the release lever with...
