Search results

  1. jason81k20

    can i use leafs out of a half ton pack in my 3/4 ton pack??

    Alright sweet thanks man!
  2. jason81k20

    can i use leafs out of a half ton pack in my 3/4 ton pack??

    Alright thats awesome to know, it'll save me about $400 bucks on new springs. What do I use for center bolts?
  3. jason81k20

    can i use leafs out of a half ton pack in my 3/4 ton pack??

    So my k20 has a few broken leafs on both sides and I just bought a 1/2 ton parts truck. Could I just disassemble the packs and replace The broken ones with one's out of the 1/2 ton? they're the same width. I believe my broken ones are in the middle kinda I searched with no luck
  4. jason81k20

    need some things

    I was gonna do that but haven't found one in the pick n pull with the bed off of it yet
  5. jason81k20

    need some things

    Yup that's the ones. The bolt to the cross member then go down to the frame/spring hanger
  6. jason81k20

    need some things

    The one at the front perches for the rear springs. My crossmember is good but the two braces rotted out so I need them, don't really wanna dick around making them
  7. jason81k20

    need some things

    I don't have one at all haha, hmmm I'll look into what a new one costs
  8. jason81k20

    need some things

    Yeah that's the one I'm talkin about, couldn't think of how to describe when I posted haha
  9. jason81k20

    need some things

    Why not?
  10. jason81k20

    need some things

    Alright fellas I need some things I'm having trouble finding at the pick n pull here 1.) 82 heater control thing. Just heat no a/c 2.) Tan or black seat belts 3.)crossmember braces for the one under the front of the bed 4.)82 wiper motor That's all I can think of at the moment, easy stuff...
  11. jason81k20

    81-86 k5 blazer parts

    Are the dual stabilizer brackets any good??
  12. jason81k20

    5.3 into 81 k20 with th400 np208 questions

    And I can use the Dakota pulse generator with my factory Speedo and everything? Thanks for the info man! Sent from my HTC6500LVW using Tapatalk
  13. jason81k20

    5.3 into 81 k20 with th400 np208 questions

    I'm trying to get all my notes together so when I put the motor in the trick finally I'll have everything. And I'd rather get advice from you guys that have done this, I've spent hours on Google! I've already cut down my harness, no trans, emissions etc My questions, 1.) What's the easiest...
  14. jason81k20

    spring questions

    I was gonna snap pics but everything is under about 3ft of snow....
  15. jason81k20

    spring questions

    Once its done this truck will never tow or haul much besides a quad...really I could use 1/2 ton springs and it not really matter but I have the 440's on hand ya know
  16. jason81k20

    spring questions

    That's the bushing?
  17. jason81k20

    spring questions

    I just got off work. Tomorrow I'll get some measurements and compare them again...would the Berlin eye effect anything?
  18. jason81k20

    spring questions

    So you guys think its worth a try? I sat them beside the springs on my truck now and they're basically exactly the same...the 440's have a little more arch but if figured with the weight of the truck on them they would squish down that little bit...they both have the same number of leaves...the...
  19. jason81k20

    spring questions

    Yeah the more I thought about it the more I figured on not trying to use em I want everything to be right
  20. jason81k20

    spring questions

    I think I'll give it a try once my shackle flip arrives..worst comes to worst I'll have to buy new springs to
  21. jason81k20

    spring questions

    A fella on my build thread said he found the measurements and they're 29x29 I'm gonna measure again with the arch to make sure
  22. jason81k20

    spring questions

    My leafs are broke and I'm buying a shackle flip to get rid of the blocks. I have some springs I was told are for my truck(81 k20 56"springs. They still have the stickers on them that say triangle spring or something like that part #22-440. I measured them and everything seems to match up but...
  23. jason81k20

    gas tank brackets

    Messages sent fellas
  24. jason81k20

    gas tank brackets

    I have an 81 k20 8ft bed my gas tank brackets were shot! has a 20 gallon tank drivers side...anybody have some laying around? its to cold to go to the pick an pull and theyre ridiculously expensive new..i have paypal and zip is 15851 let me know
  25. jason81k20

    89S's Pull A Part Thread

    How much are you wanting to get for a good gauge cluster?

Latest posts

Forum statistics

Threads
42,200
Posts
911,203
Members
33,694
Latest member
Bigjump73
Top