Search results

  1. Alaska 79 K-10

    I’m in love - here’s the truck I’m dating

    Here is the interior from my 1979. The seat cover has been changed, but the rest is the same as this 1980.
  2. Alaska 79 K-10

    454 original value add for a square body

    I feel it adds value. You will not regret it. Torque rules. I have first hand knowledge.
  3. Alaska 79 K-10

    BFGoodrich or Cooper?

    BFG!
  4. Alaska 79 K-10

    Quadrajet Choke Operation

    There is a stepped cam on the Q-Jet too. But as you found out, it doesn’t pull itself to the next step as it warms up, you must blip the throttle as you did.
  5. Alaska 79 K-10

    78 c20 10 inch wide wheels

    I think you will find that the most you can safely go on backspacing is 4 1/2” To 4 3/4”. Otherwise you will run into the tie rods. The larger wheel diameter you stated may give you an added advantage. Compare your current wheel to the tie rod, then measure your backspacing.
  6. Alaska 79 K-10

    Cussin’ a Quadrajet!

    Glad your issue was simply resolved. The Quadrajet really is a good carb. I have restored and run many. Cliff Ruggles has a great book on how to rebuild and modify them. Highly recommended read. Click on the below link. https://cliffshighperformance.com/
  7. Alaska 79 K-10

    Replacement interior door panels from USA-1

    Here are pictures of the interior showing the gray dash and seat. Pictures taken at -20 degrees here in Fairbanks.
  8. Alaska 79 K-10

    454 long block replacement and associated sensor issues

    The key is to match the sensors to your gauges, or warning lights. Use the senders your truck calls for. It doesn't matter what the engine is. It is the signal the senders give to the factory gauges. Sometimes you must adapt the correct senders to the donor engine.
  9. Alaska 79 K-10

    Replacement interior door panels from USA-1

    My dash is a light gray, as well as the seat. The color combo works really well. I will post a picture this weekend.
  10. Alaska 79 K-10

    Painted driveshafts?

    Paint it!
  11. Alaska 79 K-10

    Fresh paint

    Nicely done. Very slick
  12. Alaska 79 K-10

    Tailgate trim

    I certainly believe so. My 79 Cheyenne has this trim.
  13. Alaska 79 K-10

    86 C10 454 SWAP

    Flow chart. 12V constant at distributor (while cranking too), hot wire plugged into + battery terminal, coil grounded, coil carbon button installed, control module plugged in at both ends. Best wishes
  14. Alaska 79 K-10

    402 BBC

    Should be a fun build. Oval port heads, dual plane intake, 9.5 compression, headers, and a healthy hydraulic flat tappet cam. Sexy and affordable. Would recommend ARP rod bolt when you get the connecting rods resized. Grrrr
  15. Alaska 79 K-10

    Have you swapped a 350 for a 454? Advice needed

    Yes you can use the 350 mounts. But if there is a plate between the mount on the block, use that too! This is needed for proper spacing with the frame mounts. I leave the transmission in place. I converted over to the factory shroud
  16. Alaska 79 K-10

    Value of a 400/402 big block?

  17. Alaska 79 K-10

    Value of a 400/402 big block?

    I vote yes to the 402. Decent power, and looks great in the engine bay.
  18. Alaska 79 K-10

    Blower works on high only

  19. Alaska 79 K-10

    275/60r15 vs 255/70r15 on stock rally wheel

    I vote 275/60R15 on all four corners all day long. Fatter looks better, and the 8" wheel is perfect for this size. White letter out only if BF Goodrich. Classic. My 2 cents worth.
  20. Alaska 79 K-10

    Steering box replacement. Redhead Steering Gears. High quality rebuilder.

    I want to bring attention to a steering gear rebuilder that does impeccable work. Redhead Steering Gears. I have used them many times in the industry I am in. I have always been impressed. Clink on the link below. RedHead Steering Gears - Manual & Power Steering Gear Box
  21. Alaska 79 K-10

    Airbrushed Hood- Very cool

    Yes, this was done in Squarebanks Alaska. :)
  22. Alaska 79 K-10

    Airbrushed Hood- Very cool

    My painter friend airbrushed this hood for his bosses project 86 C-10.
  23. Alaska 79 K-10

    Noob here looking for help deciding wether to purchase a new crate motor or do an engine re-fresh

    Consider a 383 crate engine from GM Performance. You will appreciate the extra torque of the longer stroke engine. https://www.chevrolet.com/performance-parts/crate-engines
  24. Alaska 79 K-10

    No temp gauge after swap

    I would try the old sending unit. I once had a bad new oil pressure sending unit that caused me fits.
  25. Alaska 79 K-10

    3 port fuel tank selector valve

    For the three port fuel tank selector valve use a NAPA part number 2-2057.

Latest posts

Forum statistics

Threads
42,113
Posts
909,388
Members
33,606
Latest member
dave84
Top