Search results

  1. Ron Sebastian

    Help with Windshield Wiper Blades

    Here's what I went with and how they look.
  2. Ron Sebastian

    Help with Windshield Wiper Blades

    And with these tall connectors, the blades block the squirter. No solutions yet!
  3. Ron Sebastian

    Help with Windshield Wiper Blades

  4. Ron Sebastian

    Help with Windshield Wiper Blades

    I can't seem to find an answer anywhere. I am on my third set of wiper blades that just don't fit on the post arm like the originals. What is everyone using for wiper blade replacements? Tried the Anco and Trico Gold. The attaching points don't feel right on them.
  5. Ron Sebastian

    Dual Tank Valve Ground

    Can't over stress the importance of a good ground for the switch, the valve, and the fuel pumps.
  6. Ron Sebastian

    Jumpy oil pressure gauge

    It works properly, just gets jumpy sometimes. Going to change the oil and see if the gauge still acts funny. I'll do the ground test on it. If it keeps it up I'll just swap out the sender.
  7. Ron Sebastian

    Jumpy oil pressure gauge

    Every once in a while the gauge will start bouncing around like it's an electrical thing. Most times it's steady and rock solid, then it will start getting jitters. Both under power and at idle. Is this a sign of a bad sending unit. Other than that all is well and the engine performance is...
  8. Ron Sebastian

    Good LED replacement for Dash Instrument Socket and Bulb ; 5/8" ; Bayonet-Style?

    It's that easy. I would suggest getting dimm-able bulbs. Did not want to dig into the radio, so that is still white (original). Transfer case bulb is also plug and play like the console.
  9. Ron Sebastian

    I'm a legend

    I thought you were going say that umbrella is now worth $10K at some Mecum auction.
  10. Ron Sebastian

    I'm a legend

    Another thing you don't know is, it's a gift from Chevy. You can't buy it.
  11. Ron Sebastian

    I'm a legend

    I got mine today!
  12. Ron Sebastian

    Dual tanks work, but maybe not switching the gauge?

    Long shot, but after a lot of parts changing, a bad ground on the switch cured a big problem of gauge not reading right. Check your ground wire and ground to the switch.
  13. Ron Sebastian

    Problems with lift kit (ORD) install...

    And I'm sure that shop used that to torque all those nuts, as well as the sway bar disconnect bolt that mysteriously disappeared.
  14. Ron Sebastian

    New discovery on fuel issue

    My fuel pump/sending unit was going bad, replaced all that. The pump was a high pressure model that blew out my selector valve and flooded my charcoal canister. That to some time to figure out Also believe it or not the ground going to the selector switch in the cab was bad, ran a whole new...
  15. Ron Sebastian

    fuel switching valve cover attaching points?

    Come on, I know at least one of you still have this shield on. Go look!
  16. Ron Sebastian

    fuel switching valve cover attaching points?

    Since taking the cover off to replace the valve, I can't for the life of me remember how it all goes back together. I have the furthest hole back attached and the bar attaching it to the frame, but the furtherst forward hole in the cover does not appear to have anywhere to bolt to. Can't find...
  17. Ron Sebastian

    Problems with lift kit (ORD) install...

    Extra long deep socket, right!
  18. Ron Sebastian

    Problems with lift kit (ORD) install...

    I'd like to know what tool they used to torque that long U-bolt?
  19. Ron Sebastian

    '87 V1500 2" Lift Advice

    Also did ORD kevlar bushings and greasable bolts on all points. I think it helped the 35 year old suspension.
  20. Ron Sebastian

    '87 V1500 2" Lift Advice

    Looks great! I know exactly what you had to go through. By the way I also installed the ORD sway bar disconnect and I might be the oddball but I feel it rides better with the sway bar connected.
  21. Ron Sebastian

    Fuel tank sending unit broken hose

    I have had to drop the tank several times over the last month. Six bolts drop the tank. Undo the filler tubes and use a floor jack to lower the tank. Loosen the fuel lines, pull the wire plug and it's free.
  22. Ron Sebastian

    Method 701 milled aluminium rims

    16
  23. Ron Sebastian

    Method 701 milled aluminium rims

    I just added 1" spacers. The tires don't stick out obnoxiously and not much at all in the rear. 4" backspace clears the tierod, 4.5" which mine are hit.
  24. Ron Sebastian

    New Method 701 racing wheels

    I can tell you this, Method claims you can air down to 8 PSI, which I believe. Watching the guy mount the tires, his machine was airing up so slow, it got way up around 65PSI and the tire was bulging all around until it finally popped in. Scared the whole shop x 4. He said if it did ever break...
  25. Ron Sebastian

    New Method 701 racing wheels

    Your guidance was spot on. Could not ride better with that suspension!

Latest posts

Forum statistics

Threads
42,054
Posts
908,061
Members
33,537
Latest member
Toby 406
Top