Search results

  1. boloboss

    The squeaking is getting on my last nerves

    What’s up guys!!! …so recently I lowered my front end drop spindles, drop springs, drop shocks and I’ve also changed out all of my front end parts, bushings, control arms, ball joints, bump stops you name it…but now I have this squeaking sounds on the right and left as the truck drives. I’ve...
  2. boloboss

    DELETE EXTRA ITEMS NOT USED

    What's up guys?? take a look at what I have circle in the picture. I want to delete this. I need to know what does it control and will my windshield wipers still work?
  3. boloboss

    CROSS MEMBER FRAME BROKEN

    What's up guys??? The suspension shop brought to my attention that I had a hairline fracture on my crossmember frame near my gearbox. I have been noticing a light popping sound when I come to complete stop and also when I make a hard cut to the left which is the side where the hairline fracture...
  4. boloboss

    ELECTRIC CHOKE/ FAST IDLE

    Wazzz up guys???? My Edelbrock 1406 carburetor's electric choke is not resetting the fast idle cam after I'm done driving for the day. Note: If I manually set the fast idle screw on the cam when the engine is cold before I start up, the choke does open electronically, and when I hit the gas...
  5. boloboss

    CARBURETOR DATED

    What's up guys? I have a 18 -year-old 1406 Edelbrock carburetor that's been rebuilt twice. Ot stars right up in the morning, no problem......but, I've been having issues with it not cranking right up after I've driven it for 30 minutes, let it sit for while, then try to start it up again... and...
  6. boloboss

    STEERING COLUMN

    What's up guys, ...when I turn my steering wheel to the right I'm hearing a screeching sound. It's not coming from none of the front end parts. I had all that lubed up. What could it possibly be? Also, my steering column on the inside of the truck is loose at the neck by the tilt linkage and...
  7. boloboss

    Carburetor Issues

    What's up guys??? ... regarding my question earlier .... why after I start my truck and it gets warm, then I drive, cut it off, and it sits for an hour.... I have to pump the accelerator to get it started,??? ....then turn the engine off, and it starts up continuously with no problem??? ...
  8. boloboss

    350 small block

    What's up Chevy family???? My 84 Chevy C10 has a 350 small block with a Edelbrock carburetor. It used to crank right up when I turned the ignition and now I'm having to tap the gas a few times before it start and sometimes more than that. But then once it gets going I can turn the truck off...
  9. boloboss

    Idle timing

    I have a '84 Chevy C10 with a 350 engine. What should idle timing be set at
  10. boloboss

    Swapping out OEM distributor with HEI distributor

    I recently swapped out my OEM distributor with a HEI distributor. However, I noticed on the HEI distributor there's not a harness wire as on the OEM distributor. Although when I hooked up the new distributor without anything going to that wiring harness, everything is working fine. I'm trying to...
  11. boloboss

    Wiring Glitch/ Identity 2 Wies

    what's up guys it's been a while, 1st: I recently pressure washed my engine, and organized some wires, and now my oil, temp, and voltage gauges are not reading, but they fire up. (Against the rear firewall, and between brake booster & distributor. a blue wire, and a green wire is not hooked...
  12. boloboss

    84 c10 door jam switch

    Per/ The two wires for the courtesy light's door jam switch: are brown and white. What are each wires function??
  13. boloboss

    Q: Vacuum Line

    Could this possibly be a broken vacuum line? It has a small hole running through it. Look to be broken off, or could be a nipple for something?
  14. boloboss

    Q: AC Vacuum Accumulator

    Not sure what this part is Can anyone identify? It has 2 vacuum leads, if so how does it hook up, and what does it do?
  15. boloboss

    Q: Trick to Reattaching Speedo-Cable

    Please Help Me: How in the world do I get my hands behind the gauge cluster so I can attach the speedometer cable to the gauge cluster. My issue is there is no space to get my hands back there. Q: what's the trick or technique
  16. boloboss

    Wire Connector

    Hey there! Need to know what is the green wire w/ orange male snap-connector coming from the fire wall into the truck next to the fuse panel??
  17. boloboss

    AC Not Blowing Out Top Vents

    Took apart and cleaned the rubber vacuum dial on the selector switch at the rear of the climate control. All vacuum lines appear to be attached to everything behind the dash Q: any advice
  18. boloboss

    Bulb Holder Printed Circuit Board

    I change my bulls to LED and a new printed circuit board. I'm having problems with getting the bulb holders to make contact on the circuit board. Some work, some don't. I wiggling, then change direction as I'm twisting in...then they come on ( but not all) Q: any advice
  19. boloboss

    Turn signal s not flashing 1984 c10

    Changed side marker, parking, and tail lights to LED. Why are my turn signals not flashing???
  20. boloboss

    Waz up guys, what size duct hose goes from the dash air box to the right hand vent, and the size duct hose that runs to the LH driver side vent??

    Waz up guys, what size duct hose goes from the dash air box to the right hand vent, and the size duct hose that runs to the LH driver side vent?? Also why is my air not coming out the top vents, And only the bottom?

Latest posts

Forum statistics

Threads
45,570
Posts
986,459
Members
38,658
Latest member
mick84
Top