Search results

  1. Hamgrease

    Power door lock relay mounting location

    Could someone please take a picture of where the door lock relay mounts and post it for me mine wasn’t mounted and I can’t find anywhere it could have, thanks!
  2. Hamgrease

    Add on and cruise control

  3. Hamgrease

    More progress

  4. Hamgrease

    Needing help locating an air filter duct

    Looking for an air filter duct for a 1988-1991 Suburban etc with a 7.4L 454, without spending an arm and a leg. eBay has a few but not in my price range. A 5.7L will not fit the air cleaner snorkel.
  5. Hamgrease

    What I started with, the 85

    Sat for years in my backyard. Started preparing under the hood for refurbishing. New inner fenders, battery tray etc…
  6. Hamgrease

    The engine build

    The 454 rebuild Speed Pro 10.22:1 domes Comp 268 hydraulic flat tappet / Comp lifters Comp timing set Comp springs Melling oil pump Cleveite bearings self ported heads Edelbrock 2.0 intake 750 Holley vacuum secondary etc…
  7. Hamgrease

    Brake rebuild on my 85

    Everything replaced except proportion value and hardlines. I also replaced the shocks with yellow Monroe’s after the pics. This was a factory 6.2L truck with factory heavy duty suspension brakes and shocks.
  8. Hamgrease

    A little interior upgrades

    Been slowly redoing my interior as time and money allows. Just a note if you’re replacing the vent door on an ac truck you’re going to have to fab a bracket to make it functional and I used a heater cable retainer to hold mine in place.
  9. Hamgrease

    Th400 kickdown switch

    Hey everyone, I have a 85 C10 that was originally a 6.2 diesel/700r4 truck. It now has a 454/400. I’ve installed the kickdown switch solenoid on the petal bracket and made my own harness, it works I’ve tested it. My question is are the accelerator petals different for the TH400 from other...
  10. Hamgrease

    Oil pressure gauge problem

    Gauge maxes out without engine running, and stays there when running. Every other gauge works properly. I’ve checked the prongs top left 12v top right 8v, bottom center ground, checked top left to where it plugs into the back of the cluster 8v, when it passes through the bulkhead at the firewall...
  11. Hamgrease

    Hello from Tn

    I'm currently working on two trucks from time to time a 1987 R10 and a !985 C10. The R10 is a longbed roller350/Th350 the C10 is a shortbed 454/Th400. Both trucks have freshly rebuilt engines/ transmissions,all new fuel systems among other large list of parts.

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,187
Members
43,338
Latest member
jw23655
Top