Search results

  1. Ontheboulder

    emergency brake cables

    the 87 had push in style Ebrake cables thru the backing plate, this has the bolt on style
  2. Ontheboulder

    Flip up wipers arms?

    dorman # 42591 and 42630 are what I found, both are 18 inches long I looked at the pics and both are spline push on type, but no mention of the spline diameter. My GMC has .61 size spline.
  3. Ontheboulder

    What have you done to your square lately??

    thanks , the area around the turn indicators seem to be a weak spot as well,I was thinking using some silicone to hold it down would help the plastic board get trained to the curves. I have had this cluster in and out 4 times chasing gremlins this winter so I will definitly check all the lights...
  4. Ontheboulder

    What have you done to your square lately??

    doing that to my gmc ,waiting on LMC for a new printed circuit. How was yours from LMC,also got some new bulb holders as mine seem to be loose in a few holes. Did you glue or silicone your new board down to keep it in place?? thinking I willl do that to mine when I get it
  5. Ontheboulder

    the car and truckshop.com

    got a new catalog in the mail yesterday,not sure if anyone else has used them. seem to be a good selection and decent prices. Truckandcarshop.com
  6. Ontheboulder

    Tail light modification

    All I did was take out the plastic fin in the bucket. If anything it puts out more light!
  7. Ontheboulder

    Different square

    Been a helluva rig! Only 83k on the odometer! Purrs like a kitten
  8. Ontheboulder

    Different square

    Jeep J20
  9. Ontheboulder

    Tail light modification

    Here is the taillight on
  10. Ontheboulder

    Tail light modification

    Here is a cou pictures of the taillight bucket after I cut it out
  11. Ontheboulder

    Tail light modification

    exactly, I cut the marked out area away, no exposure to the backside of the bulb holder. so no weather concerns. lots more light out of the side of the lens. I think the LED bulbs will make it even better, I will get a picture soon
  12. Ontheboulder

    emergency brake cables

    Has anyone ran into the problem of using and older style 14 bolt in a newer truck? My 87 has an earlier rear end under it and the Ebrake cables are different. GM went to routing the Ebrake cables down the drivers side in later years. they ran the passenger side cable over to the drivers side to...
  13. Ontheboulder

    Edelbrock 1405 carb running rich

    good place to start on tuning your carb is about 1-1/2 turns out,timing will make a big difference as well.
  14. Ontheboulder

    Has anyone superglued the copper contacts down on the circuit board ?

    I would use some clear silicone my self, I know those boards seem to be moving a bit and a new one would probably need to tied down for a bit until the plastic gets its curves and bumps worked out, especially around the turn indicator bulbs
  15. Ontheboulder

    Tail light modification

    I went ahead with the tail light mod. it puts out some more light to the side,doesn't seem to affect anything to the rear of the truck. the usually darker side of the lens is now got light!! Some new LED bulbs should really light it up back there
  16. Ontheboulder

    Anyone dealt with LMC Trucks for parts?

    I would call them and speak to a supervisor
  17. Ontheboulder

    1983 HEATER BOX BROKEN

    Check LMC truck or classic industries
  18. Ontheboulder

    Need help with 465 clutch adjustment

    Well now it’s making sense! Sounds like the pressure plate is sticking and maybe has some broken springs. Sitting since 2007 hasn’t done any good
  19. Ontheboulder

    Need help with 465 clutch adjustment

    did you put the clutch plate in correctly?
  20. Ontheboulder

    1988 K5 headlight issues

    on mine it was the ground an the low beam, Octane lighting is the housings I got
  21. Ontheboulder

    1988 K5 headlight issues

    I went to an H4 bulb setup on my 87, had to swap the ground and low beam wires in the connector,just changed their position in the connector works great!! hope this helps
  22. Ontheboulder

    horn question??

    well just a quick update, the horn is working!! the lights are working!!! and I got the windshield wipers to working!!!, this truck has been a challenge for sure.lots of little stuff gone wrong from sitting and previous owners work. Now time to get back at it and re-install the dash and get on...
  23. Ontheboulder

    Front axle off set to passenger side

    the grease coming out means it is full!
  24. Ontheboulder

    Front axle off set to passenger side

    from that quote I would bet your frame is tweeked.
  25. Ontheboulder

    Flip up wipers arms?

    what was the length of the arm from the hook to the splined shaft on the cowl??

Latest posts

Forum statistics

Threads
45,959
Posts
996,982
Members
39,160
Latest member
El Greengo
Top