Search results

  1. Tonimus

    FS Door Locks

    Two B keys and a H key. All three keys work.
  2. Tonimus

    TH400 Yoke Bolt Came Out

    I kept the original washer. It's in serviceable condition.
  3. Tonimus

    74 C10 rear end interchange

    If you're going like for like axle and doing the whole axle, I believe all the square body rear ends are set up the same.
  4. Tonimus

    Gas in Oil!?

    My fuel pump was leaking oil like crazy out of the weep hole. Any time I'd load up the engine over 2500 rpm, it would spew oil all over the place. It was impossible for me to tell. My buddy that used to build engines for a living told me to replace the fuel pump. I did. And I'll be darned if the...
  5. Tonimus

    FS Door Locks

    Sure looks like it. I can verify when I get home late tonight. Not too knowledgeable about key letter codes.
  6. Tonimus

    TH400 Yoke Bolt Came Out

    I've got the housing, grade 8 bolt, and some blue loctite. Probably get to it sometime this week. Wish I didn't have to move the center support bearing, but I guess I can't be too mad. That's the only thing holding in the yoke at the moment.
  7. Tonimus

    FS Door Locks

    I was just going to toss them in the garbage. Figured if someone here needed a set cheap, I'd put them up.
  8. Tonimus

    What have you done to your square lately??

    Tightened the valve covers, new 94 amp 12SI alternator, all new v-belts, new headlight adjusters, aimed the new LED headlights.
  9. Tonimus

    Which aftermarket LED headlights?

  10. Tonimus

    CA Smog exemption

    What company is this?! I didn't find one that would let me tow ever with it!
  11. Tonimus

    Wiring Harness? Choosing one?

    If most of the connectors are good or you can be replaced with something else you have on hand, you could use one of the universal kits. Those are also excellent kits and are way cheaper due to the lack of connectors.
  12. Tonimus

    Wiring Harness? Choosing one?

    Keep in mind that I'm a cheap son of a gun, too. The wiring harness in my race car is basically the cheapest AAW kit you can get. But I did their kit in my '84 C30 when I had it and that was one of the easiest kits I've done. And I've done too many.
  13. Tonimus

    Wiring Harness? Choosing one?

    Not sure what you were seeing, but I see the $1,016 at Classic Industries. https://www.classicindustries.com/product/1985/chevrolet/k30/parts/510706.html The classic update kit is mostly plug and play and replaces nearly everything. It's a nice kit and worth the extra money, IMHO.
  14. Tonimus

    Which aftermarket LED headlights?

    I put these in my '78. https://a.co/d/hHU4LKU I had to shim the back out a little as the new rims are slightly thinner than the old ones and the trim ring didn't clamp down properly. For the price, I was more than happy to do it. As far as the LED bulb, I use the Auxito branded H4 bulbs. I...
  15. Tonimus

    Suburban Power Tailgate with new motor mod

    I had no idea prior to this. Trap for new gamers? Might have saved the last motor gear if it hadn't been fighting so hard.
  16. Tonimus

    Suburban Power Tailgate with new motor mod

    A pair of pliers and a strong arm. Put a bolt through a hole in the regulator to hold the arms in place.
  17. Tonimus

    Hello from AZ

    Welcome from the Phoenix valley. Was that on FB or OfferUp? Swear I think I saw pics of it.
  18. Tonimus

    TH400 Yoke Bolt Came Out

    I'll start with story time. Sunday, I'm driving home, doing 75 on the freeway. Suddenly I feel a slight vibration, like a tire going down. Throw the signal on and I get the hell over and work my way to the next exit. The slower I get, the worse the vibration gets. Then it seems like the tire is...
  19. Tonimus

    Suburban Power Tailgate with new motor mod

    Probably. I got an eBay one. Cardone doesn't do them anymore. I didn't call GM, but it looks like most everything is the same chinese junk I got on eBay.
  20. Tonimus

    What have you done to your square lately??

    A couple of pics of what I did. Hope it helps. https://www.gmsquarebody.com/threads/46083/
  21. Tonimus

    Suburban Power Tailgate with new motor mod

    If anyone has installed a "new" window motor in the tailgate of their Suburban, you may have noticed that there is very little engagement between the motor gear and the regulator gear. I think the motor gears and motor mount standoffs are just a little wrong. I cut 1/8" off of the motor...
  22. Tonimus

    C20 to c10

    We converted a '72 C20 to modern 6 lug stuff. What we ended up doing for the front was we got a ball joint reamer and reamed the 1/2 ton lowering spindles to fit the 3/4 ton suspension. Worked fantastic.
  23. Tonimus

    Bench seatback foam from LMC - anyone else installed it?

    Is it a different density than the main section? Other than that, I don't know why there'd be separate sections.
  24. Tonimus

    Whats your opinion these welders?

    I have the Titanium Unlimited 200. It's a great hobby level welder. I use a Millermatic 220 at the shop. I can do most of the same MIG work with the Titanium as the Millermatic, but also do TIG and stick. The only "major" downside is the duty cycle compared to the Millermatic. But I don't lay...
  25. Tonimus

    What have you done to your square lately??

    I read it somewhere. If I can’t find it again, I’ll draw up something. Maybe open up the tailgate and snap a pic or two.

Latest posts

Forum statistics

Threads
45,954
Posts
996,851
Members
39,154
Latest member
cmcqueen
Top