Search results

  1. Y

    Replacing fuel lines 5.7 L

    Tube is bolted to bellhousing and then just comes out the seal area on trans. I did not have to take the transmission dipstick tube out when doing the fuel lines, but don't remember exact details
  2. Y

    another elco

    Some throttle linkage brackets been a bit wrong from when I changed to electric choke. Was going to buy a new one. But after looking at the prices, modified original had to work. Washers and a welder to the rescue. Now been thinking about AC. It lost all charge completely, so guessing not...
  3. Y

    NP205 Rear Yoke

    Send me a message, obo+shipping
  4. Y

    Another AC Thread: Which compressor??

    One in my 71 elco leaks enough to need a charge once a year. R12 is expensive to fill it once a year, so I stopped refilling it for now. Need to revisit it again as temperatures go up.
  5. Y

    Steering gear rebuild - FAIL

    On 4wd just adjust the link between the pitman arm and the thing on the knuckle to center the steering wheel.
  6. Y

    NP205 Rear Yoke

  7. Y

    36-3582 Headlight harness 89-91 with custom headlights

    Was being stupid and sold it. The buy back attempt the same day with some cash for trouble did not work. Was forcing my self not to spend money on it in a way, but ended up being in a worst spot. Maybe it is better, as it is one less forever vehicle
  8. Y

    Steering gear rebuild - FAIL

    Did the power steering work before the seal blew out? Would venture maybe the pump having an issue if it worked before the seal popped. Or top it off with fluid and just go on a longer drive to see if it settles.
  9. Y

    NP205 Rear Yoke

    If not in too much of a hurry, i can check what shape the stock one I have is in tonight.
  10. Y

    NP205 Rear Yoke

    Stock style or flange? I have a stock one from when it was swapped for a flange. Bought the flange through high angle driveline. Had good luck getting parts from Dennys driveshaft
  11. Y

    Scores from DIY Parts Yards, Pull A Part, U Pull It etc

    Did not think much of the front calipers. Kicked my self for trusting the seller on the 8.2 diff and not taking a closer look at it. Was in a hurry, so just loaded it and it stayed in the back until the zr2 axle went away as I had no space. Once I got it out, quickly realized that it was 8.2...
  12. Y

    Replacing fuel lines 5.7 L

    As for comple replacement with new, a local hose and gasket place should be able to fix the flex portion of the line with new hose. Or adapters and ptfe lined hose with an fittings, or as above mentioned adapters and hose
  13. Y

    Replacing fuel lines 5.7 L

    I replaced all of the fuel lines on 88 suburban using stock parts from a parts suburban. Was not that bad. Disconnect lines, bracket and pull them. But I don't remember if went up or down with them.
  14. Y

    Scores from DIY Parts Yards, Pull A Part, U Pull It etc

    I am confident whoever wrote that one off did not know what they had. It was clean. I grabbed the rear end to use for my 67 camaro and then due to various misadventures have lost it. longer version: Bought a direct bolt in 8.5 instead, sold the zr2 axle and then found that 8.5 was really 8.2...
  15. Y

    Scores from DIY Parts Yards, Pull A Part, U Pull It etc

    Zr2 blazer at the local yard
  16. Y

    GMC Savana, Plus a Chevy Express Now Too

    Agree on a van, just not much on the yellow part. I liked the access from front seats to back in a van when we drove the e350 around. Brefer the gm version. Especially the stability control thing been acting up on the e350 van lately
  17. Y

    Tailgate window motor trouble for Suburban

    I had to do wiring, roller and track adjustment with motor on my old suburban
  18. Y

    89 Trans Am

    I am with the no holes being cut camp. Keep adapters and inline pump if need to limp a vehicle home.
  19. Y

    Steering gear rebuild - FAIL

    If I remember correctly, first should turn back and forth with engine not running. But generally never had issues with just running and turning the wheels following by a short trip. Back when I first bought a reman from autozone, it blew out on the first long trip and killed the power...
  20. Y

    Steering gear rebuild - FAIL

    Seal not seated all the way with snap ring? I would put the reman box in the bench and go through adjustment procedure before putting it in if it is a standard parts store reman
  21. Y

    Tailgate window motor trouble for Suburban

    I would verify the voltage supply to the motor and the condition of the tracks as well.
  22. Y

    89 Trans Am

    Fill plug on a white camaro diff just did not want to give up.
  23. Y

    Weatherstripping

    I am about to use steele rubber set on my 89 trans am in a couple of weeks. Thinking maybe should have went with soffseal, but going to find out soon. I have tried Fairchild before and was not happy with them. Especially on the way seals designed for the f bodies, fairchild pieces were falling...
  24. Y

    Looking to sound deaden your truck? Dynamat? watch this first.

    Had a chance to play video eventually. Turned out same to what I ended up using. I also had good luck with closed cell foam backed with mat type material for certain applications
  25. Y

    Burnouts with a NP203 full time 4wd?

    Send it. And then let us know what broke. Or pull with the bumper against large tree and then let them spin

Latest posts

Forum statistics

Threads
45,655
Posts
988,685
Members
38,751
Latest member
kains77
Top