Search results

  1. C

    Jump/console seat

    When it’s higher that’s reverse without the slop
  2. C

    Jump/console seat

    There was a guy down road selling front seats from 2008 ford. Came with jump seat. Jump seat fits perfect width wise but no matter where I adjust it my shifter (sm465) always hits it in reverse. Maybe the shifter is extremely sloppy? I remember it coming pretty close to old bench seat part of...
  3. C

    Winch fairlead adapter

    Is there somewhere to buy a universal fairlead adapter ? Everything I keep finding is for atvs
  4. C

    Jump/console seat

    I was leaning a more junkyard kinda way, but There’s a few good ideas on there Ok I’ll try and get a hold of something here soon
  5. C

    Jump/console seat

    I have a set of 90s gm buckets in my truck and never got around to putting a console in there, so there’s nothing in the middle Truck is 83, 4x4, sm465 now is there a jump/ console seat that someone could point me in right direction? Only thing I was worried about seat wise is the shifter...
  6. C

    Dash bulb holder

    So I gotta throw new speedo cable in and I know I'm missin a couple little bulb holders that go to dash Are they 1/2" or 5/8
  7. C

    Power steering belt routing

    Thanks I'll measure that out! That would be my terrible picture photo taking. It looked lined up.
  8. C

    Power steering belt routing

    So i got a new motor in truck and I'm not sure how the power steering belt goes Does it go from the balancer straight to the power steering pump or from balancer around water pump around power steering pump. They look like they both work so I'm a little confused
  9. C

    Center console stereo

    So I swapped buckets into truck (90's buckets mounted on the old bench seat frame) and I dint want to cut the dash to put a deck in. I've done that before and found it was in a inconvenient spot and made a rat's nest of wires. So this time around I'm wanting to modify or build a center console...
  10. C

    235/85 Or 265/75 tires

    Just an update Tire are pretty decent so far, no separation or anything wild Pretty decent snow traction and even ice Not much road noise and haven't hit or been rubbing with that size tire
  11. C

    Auxiliary trans

    I saw it a few years ago was left kind of confused but whatever to each their own.
  12. C

    Auxiliary trans

    Or this...
  13. C

    235/85 Or 265/75 tires

    Uhm after taxes looks like they were $1140 mounted and balanced taxes in. I got them from a local garage so if I paid a bit more so be it. They were pretty good to deal with. I've only put about 100km on so far but they seem to be pretty quiet for what they are. I'll keep updating how they...
  14. C

    235/85 Or 265/75 tires

    I ended up with some all terrains too which doesn't bother me one bit
  15. C

    235/85 Or 265/75 tires

    So I got tired finally. Apparently they were out of 265/75 and so they decided to throw 285/75 on there. I don't think they rub
  16. C

    Front end stuff

    After taking it apart 3 times I'm rolling without the c clip Also those sockets for the hub nuts complete junk RIP the tabs off right away But I made one with part of an old telepost and welder. Thanks for the tips guys it's always appreciated
  17. C

    Front end stuff

    The oil seal on the back of the hub i just put in flush with top, was it supposed to be pushed in more? And put it in the flat side of seal facing towards the axle Is that the wrong way? Sent from my SM-G930W8 using Tapatalk
  18. C

    Front end stuff

    You might of driven past it just small town of the highway. Mind you it's a little hard to miss now speed drops from 100km to 50km through town. I've encountered another problem got it all back together huh nuts torqued out the locker piece in the hub and now I can't get the snap ring on the...
  19. C

    Front end stuff

    I'm north of weyburn small town called yellow grass I think I figured it out the big spring went inside the hub selector cap and the smaller spring fit inside the hub behind that small gear and seems to be held together by a small screw to stop it from popping out
  20. C

    Front end stuff

    I was a dummy and didn't take pictures. Where do the springs go?
  21. C

    Front end stuff

    I found one convinced them to sell me the one instead of the kit. I'm having a brain fart with the parts I have left. Well it's those 2 big springs mostly are throwing me off where they go
  22. C

    Front end stuff

    So I'm in the midst of doing my bearings and ball joints and I'm trying to find the socket for those locking hub rings(the socket with prongs on it) Canadian tire and napa don't know what I'm talking about or need a specific size. There a part number I could give the. To cross reference that...
  23. C

    paint code

    Hey what size tires you have 9n your truck?
  24. C

    235/85 Or 265/75 tires

    These are the tires I was looking at. Talked to some one who pur them on their 2006 f350 they said they'e ok for price. I'm leaning towards the 235's. I'll try and get pics once they'e on
  25. C

    235/85 Or 265/75 tires

    What about 285/75 r16 Is that pushing it with no lift? Truck currently has 245/75 in front 265/75 in back (just junk tires that were on it to get it home.)

Latest posts

Forum statistics

Threads
45,558
Posts
986,228
Members
38,644
Latest member
FenderBanger
Top