Search results

  1. kleedus

    Sm465 PTO removal

    yes just pull it off and put the cover back on
  2. kleedus

    1-ton swap

    the front is a bolt in deal as long as you got the u bolt plates with the dana 60. the rear is not a bolt in like you have found out the 1 tons have the springs set in closer to the frame for clearance to run dual wheels. I always use a 3/4 ton 14 bolt they are a direct bolt in. 1 tons...
  3. kleedus

    never jerk a stuck truck with a chain

    I got a call from an old friend today to help pull out a stuck ford. I got there and watched a num nut in a duramax backing up 15 feet and hitting the chain hard to jerk the ford out. it was violent and scary I am surprised the duramax did not set off the air bags. the chain broke and flew...
  4. kleedus

    79 camaro

    I also have a 73 Z28 with the same size cragar ss wheels on it but I don't have any pictures of it.
  5. kleedus

    79 camaro

    mine is an original Z28 the only rust on it is the lower font fenders the quarters and underbody are rust free. the interior is black but the carpet and door panels are gone and the seat frame on the driver side is broke. I put a 400 horse 400 with a Muncie m-22 4 speed but I hate the...
  6. kleedus

    79 camaro

    sweet I love the 78 to 81 Camaro. I wanted a t top 4 speed car but all I could find is a automatic non t top car. so I converted it to 4 speed and cut the roof off a t top trans am to swap on my 79 Z28 some day.
  7. kleedus

    my nv4500/205

    its been awhile I don't remember the part numbers look on advance adapters site or call them
  8. kleedus

    1964 gmc 2 ton truck

    if it does not sell I have a long bed and a set of step side fenders I may make a dually long bed and shorten the chassis to make it a pickup. kinda like the on in this picture. I will include the bed and fenders for members of this site if they buy the truck.
  9. kleedus

    1964 gmc 2 ton truck

    it would be really hard to find one in this condition it is not a clapped out worn out beat to shit work truck it had a grain dump bed on it before I got it and it has very low miles for a 51 year old truck. they did not use it much normally a truck like this the suspension is worn...
  10. kleedus

    thinking of going TBI

    if you are good with wiring the tbi swap is pretty easy
  11. kleedus

    parts identification axles transmission/t-case and so on

    14 bolt semi floater light duty 3/4 ton rear
  12. kleedus

    parts identification axles transmission/t-case and so on

    14 bolt rear axle 73 to 87 (1991 crew cab) 1 ton and 3/4 ton they had a full floater and a semi floater 14 bolt. the semi floater came around in the early 80's I think. the full floater has a 8 bolt flange that sticks out in the center of the wheel. that makes it easy to identify. it is a...
  13. kleedus

    parts identification axles transmission/t-case and so on

    I have spent a lot of time explaining to people how to identify parts so I thought this would be a good thread to start. it is easy for me to identify them just at a glance but a lot of people don't know a dana 60 from a 10 bolt. I will start with a dana 60 front axle they came in all 73...
  14. kleedus

    1964 gmc 2 ton truck

    ok I am giving up on a few random projects don't worry none are my squares. I have decided this gmc is not what I really want as a hauler I found a crew cab square ramp truck that I want. I need to sell a few things to get it. this 64 gmc 2 ton has a 305 v6 industrial motor sm420 4 speed...
  15. kleedus

    !!!!Need Np208 transfer case!!!!

    I have a few 208 cases but shipping is a lot from here. I don't have time to tear out an input gear or that could save a lot of shipping. what transmission do you have turbo 350 and 700r4 have the same input gear turbo 400 and the sm 465 4 speed(85 and up) have the same input gear in 85...
  16. kleedus

    from one shade tree mechanic to another

    dawn dish soap is all I have ever used.
  17. kleedus

    Carbon buildup/issues

    is the 90 350 still tbi if so you need to unplug a tan wire set timing to 0 and then plug the wire back together. the computer does the timing on a tbi engine. if it is still tbi it would be a conversion on the 83 hard telling how it was done to say where the tan wire is located now.
  18. kleedus

    Replaceable panels?

    Michael I grew up in your area mostly willow hill and newton this is a picture of my crew but the front rockers would be the same
  19. kleedus

    got a small shop to work out of

    I have a small 2 car garage at home that I have worked out of for years it has gotten kinda full with tool and equip. not much room left in it for a truck. it has a short door and ceiling my 64 build is in it now I will have to air out the tires to get it out.
  20. kleedus

    anyone know anything about parts washers?

    I use a solvent called Stoddard solvent works well I get it from a local supply place here I have no idea where it would be available in your area. talk to mechanic shops in your area and ask them what they use and where to get it
  21. kleedus

    got a small shop to work out of

    I rented a small 2 bay shop and bought a hoist and am starting to buy some shop equipment for it. transmission jack oil drain barrel. rounding up what I can a little at a time. finally getting some of the thing I have always wanted. it makes things ALOT easier. I call it MT Pockets Garage
  22. kleedus

    Found a mud truck for my brother

    a 1/2 ton front axle 10 bolt or dana 44 is just as strong as a 3/4 ton. pretty much they are the same axles only 8 lug or six lug. the rotors and the brake caliper mounting bracket are the only differences between 1/2 ton and 3/4 ton axles. and in my opinion a 10 bolt and a dana 44...
  23. kleedus

    On board water?

    to have enough water to do much more than wash the windshield you will be carrying a lot of weight. and to have any kind of real pressure a good pump will take up a lot of room. or a metal storage tank to handle air pressure will ad weight as well. not sure on board water more than a gallon...
  24. kleedus

    Built 200r4 trans

    the 200r4 was put behind a v6 in a somewhat light car I would not put one in a truck. I have a buddy that swears one will hold up to a blown 454 he is putting one in his blown 454 c-10. I tried to talk him out of it but he is doing it. to build one to handle any kind of power you will spend a...
  25. kleedus

    Sliding rear window frame parts NEEDED

    there where so many different manufactures for those rear windows I rarely see two that are the same finding a matching piece would be hard might be easier to buy a new window. 100 bucks on ebay...

Latest posts

Forum statistics

Threads
45,558
Posts
986,228
Members
38,644
Latest member
FenderBanger
Top