Search results

  1. R

    6.2 to 350 swap

    Both glow plug wires? There are 8, green wires. Or did you cut off at the start of where they branch off to 4 on each side and use those? I did not know they were constant ignition power? I want to keep wires intact in case I go back to the diesel.
  2. R

    6.2 to 350 swap

    Yes sir if in good shape. There are guys looking for them
  3. R

    Smog thoughts

    I have seen them plugged with bolts or plugs on other vehicles.
  4. R

    6.2 to 350 swap

    What wires did you use for power from the original harness?
  5. R

    6.2 to 350 swap

    Curious what wires you used for power from the original harness? I'm at this point now. Need power for the HEI and electric choke. I'm not removing any of the 6.2 harness just incase I ever go back. Thanks!
  6. R

    700R4 question

    I'll look into that, thanks!
  7. R

    700R4 question

    Thank you! Exactly the answer I was looking for. And I guess I should have added more info.It is wired to lock up the converter when the switch is thrown. Truck is a 1971, so not a factory setup.
  8. R

    700R4 question

    I have no need for a wiring diagram, found plenty. I just simply wanted to know when to use the switch. This is not in my truck, but in another one I own. And it is gas, a 327. There is always a smart ass in every group. A simple answer or a pass would have worked.
  9. R

    700R4 question

    Can you elaborate on the second paragraph?
  10. R

    700R4 question

    When running a 700R4 with a converter lock out switch on the dash, when would that switch need to be on? Thanks!
  11. R

    Fuel tanks

    I need to pull both of the tanks in my 82. What is the best way to go about doing this? Drop the tanks down, or jack up the bed? Or? Any advice appreciated!
  12. R

    Throttle cable bracket

    Converting from a 6.2 to a 400 SBC. Just trying to figure out where this bracket mounts, now that I know I will have to modify it to work with a Holley, actually going to run a Quickfuel. Thanks for the help!
  13. R

    Throttle cable bracket

    Does anyone have a pic of where the throttle cable bracket goes/mounts on a 350? Converting to a 350 and acquiring parts. Truck is a 1982. Thanks!
  14. R

    This is probably a bad idea, but I'm too cheap to pay for a tow.

    Pay 100 bucks and get AAA. Then get it towed.
  15. R

    6.2 to 350 swap

    I always thought the Detroit Diesels looked a lot like a 350 with a big spider on top.
  16. R

    6.2 to 350 swap

    That crossed my mind, but I hate computer controlled engines.
  17. R

    6.2 to 350 swap

    Nothing will be going into the dumpster! I'm a car parts hoarder LOL. Besides I want to be able to go back if I come across a good 6.2
  18. R

    6.2 to 350 swap

    Ring gear on my T400 flex plate exploded,destroyed the transmission and unfortunately broke the starter off the block. Truck only has 54K miles on it. Hard to find a decent 6.2. Came across a nice SBC 400 to swap in. I think I will go with a 700R4 instead of thr T400.
  19. R

    6.2 to 350 swap

    Fill me in on the K5 tank swap? Sounds intereting.
  20. R

    6.2 to 350 swap

    Curious why you swapped tanks instead of just cleaning and using the ones you had?
  21. R

    6.2 to 350 swap

    About to get underway with the swap. Are there any potential issues to watch out for? Or pretty much a straight up swap?
  22. R

    Swapping from auto to manual trans

    Then I'm guessing finding a starter that would mesh with the 6.2 flywheel and have enough torque to spin the 6.2 would be a challenge.
  23. R

    Swapping from auto to manual trans

    Does the starter still bolt to the block when running a four speed? Or does it bolt to the bell housing?
  24. R

    6.2 to 350 swap

    Has anyone gone from a 6.2 to a 350? What is involved in doing a swap like this? Weighing my options since the T400 blew and took the starter bolt mounts with it. Thanks for any advice!
  25. R

    Swapping from auto to manual trans

    When you get a chance, shoot me a PM of what you want for the pedals. I'm still weighing my options as to how to go about getting the truck back on the road. Thanks!

Latest posts

Forum statistics

Threads
48,672
Posts
1,074,291
Members
43,344
Latest member
Original
Top