Search results

  1. 84GMCSierra

    Drivers side manifold

    Are these particular manifolds hard to obtain? I've looked everywhere but can't seem to find this particular one with the port straight down. I've found a few with it angled back a little but that's it
  2. 84GMCSierra

    Looking for a decent bench seat cover that doesn't break the bank...

    I have the saddle blanket style on mine I got on Amazon for about $45. Same thing on LMC is like $90-$109. I have someone going to completely re do my seat in Marine grade blue vinyl for $700
  3. 84GMCSierra

    No oil pressure

    Thanks. I think we've figured out what's causing the problems: Zepbound GLP-1. She ended up in the hospital after the 2nd dose. Now I see why the commercials say "Don't take this medicine if you're allergic to it". Don't know until you take it.
  4. 84GMCSierra

    No oil pressure

    Thanks. Her diverticulitis kicked for the 2nd time in a month. Next is surgery in a month.
  5. 84GMCSierra

    No oil pressure

    I have the distributor on my bench at work, and everything is in perfect working order. My only other thing to check is the engine oil cooler and lines. I'm thinking of just replacing them and the cooler so all that is new. On a separate subject, how do I become a premium/paid member on the site?
  6. 84GMCSierra

    No oil pressure

    Has anyone used these from LKC? The site says for 4wd, but will it work on a 2wd with factory cooler? Line ends where they connect to the radiator look to be on a different angle than where mine mount
  7. 84GMCSierra

    No oil pressure

    I'm using an oil primer tool made from an old distributor that was in my old 65 Suburban that I cut the top off of I was going to pull the oil cooler lines this morning but my wife is in the hospital so put it on hold for now. I'm trying to find an oe style set of lines that are already pre made
  8. 84GMCSierra

    No oil pressure

    Update. New pump is in, new oil and filter but oils is not being pumped through the engine. Pulled a valve cover and nothing is being pumped to the rockers. Could tye oil cooler lines have anything to do with this issue? Going to pull them off tomorrow and run the pump drive and see if anything...
  9. 84GMCSierra

    No oil pressure

    Just curious about the difference besides size with these 2 oil pressure switches? $30 difference sure seems like an awful lot if they do the same thing
  10. 84GMCSierra

    No oil pressure

    Thank you. I never new about this
  11. 84GMCSierra

    No oil pressure

    It might be bad. It's tight and the wire is connected
  12. 84GMCSierra

    No oil pressure

    The engine wasn't hot. My truck sat in the shade for 3-4 hours. Where is the bypass valve?
  13. 84GMCSierra

    What should I do with this toolbox?

    I have a 3 drawer from Tractor supply that I keep the most important tools in when I go on long trips like when I go on the Rt 66 Fun Run in May. When I'm back everything goes back in my large rolling tool box
  14. 84GMCSierra

    No oil pressure

    Good Morning Everyone I have a dilemma going on with my oil pressure. My 84 with a 350 ha been running great, everything normal, but after I parked it at work Sunday morning and then came out and started it, to go home, I had no oil pressure. No knock or running rough. I rapped on the gauge...
  15. 84GMCSierra

    True paint code look!

    I like this paint scheme on the later(81-87) models. My 84 base Sierra needs something like this to break up the white.
  16. 84GMCSierra

    What have you done to your square lately??

    I put a saddle blanket seat cover on my 84 today. Until I can afford to have the seat done right, this should keep the sun dried cloth that's torn bad on the driver side from getting worse
  17. 84GMCSierra

    Stockvs Ram horn manifolds

    I have a set of factory ram horns off of a mid 70's GMC C8000 with a 350 that I am going to have installed on my 350. I need to go to them as my dipstick went from the right side of the engine to the left side, and with the stock manifold going "over" the spark plugs, I can't put in a dipstick...
  18. 84GMCSierra

    Door panel rehab

    Definitely.
  19. 84GMCSierra

    Driving lamps/Fog lights? Anyone running them on their c10?

    I finally got my lights hooked up today, and I like them. Can't wait to see them after dark. They can be just driving, just fog, or both
  20. 84GMCSierra

    Door panel rehab

    Here's my door panel with the Krylon
  21. 84GMCSierra

    Seat covers, looking for recommendations - later in the thread reports on how my cover is holding up

    Just a heads up for everyone. I just went to the site, and they are closed due to staffing and material shortages.
  22. 84GMCSierra

    Door panel rehab

    I think I sanded mine with fine grit paper then just painted them with Krylon Matte Blue spray paint. They came out pretty good for a driver. Color is fairly close to the original blue in my 84 Sierra. When I bought my truck in 2019, it had sat in the Phoenix sun for 5 years, so they needed a...
  23. 84GMCSierra

    New wheels and tire question

    I'm looking at getting these locally this week for my 84 Sierra 2500. The guy says they came off of a 2001 Silverado and had them on his 64 K20. I'd just need to get new lug nuts. My center hole is 4-5/8" diameter and he's going to measure the center hole on them today. What's your thoughts? The...
  24. 84GMCSierra

    Your favorite old car/truck that you regret selling!

    Air Force Vet myself. Travis AFB
  25. 84GMCSierra

    Your favorite old car/truck that you regret selling!

    I don't have anything from it sorry. I didn't do the swap. A friend did it but I believe it was easy. The ignition switch was on the dash through 72, and the wiring was probably pretty similar. The swap was done in the early 2000's

Latest posts

Forum statistics

Threads
48,671
Posts
1,074,283
Members
43,343
Latest member
Joestreml
Top