Search results

  1. B

    15th annual - Dino's Git-Down - Glendale, AZ 2025

    Yes, very functional but kind of OBS looking. They need to be a bit more "raw" to look right in the Squares
  2. B

    15th annual - Dino's Git-Down - Glendale, AZ 2025

    That's the one! He's got some interesting products.
  3. B

    15th annual - Dino's Git-Down - Glendale, AZ 2025

    That's not the one. I have the info somewhere but can't find it. The one these guys had was below the panel and replaced the optional carpet running the full width of the door. They also sell a plastic trim that goes around the interior of the upper half of the door to finish it off as well as...
  4. B

    Help...need headlight retainer things??

    Update: Problem solved. Thank you all! I went to 2 different O'Reilly's & Autozone and couldn't find these. I happened to check again and found an open pack(4 out of 6) and bought them to try. They are a bit snug but work. I ended up going on Amazon and buying a 30 pack for $8 as I need 16...
  5. B

    Help...need headlight retainer things??

    I think I need to find Nylon license plate nuts.
  6. B

    Help...need headlight retainer things??

    I've tried the chain stores. I'm not looking for the bucket adjusters, I need these little pieces that snap into the buckets that the retainer screws into. LMC doesn't have them. Your picture is the 81-88 and mine is a 90 Squarebody. They sell everything but the actual plastic insert. It's...
  7. B

    Help...need headlight retainer things??

    For 88-91 dual headlight truck. I need the 4 per headlight plastic pieces that snap into the headlight bucket that the retainer screws into.16 total. Thanks! Pencil pointing to square below...
  8. B

    Powrlite roll down rear window

    Wow! Always wanted one!!!
  9. B

    Hello from Arizona

    Welcome, does it have the 19.5 wheels? I've been looking for an 8 lug set for a few years,
  10. B

    15th annual - Dino's Git-Down - Glendale, AZ 2025

    Went to the show today. Parking wasn't too bad and it felt like there was an increase in smaller vendors in addition to the regulars. The smaller vendors had some cool niche products. There was a cool lower door panel that had 2 cupholders and a pocket that I plan to order. And AMD had their...
  11. B

    15th annual - Dino's Git-Down - Glendale, AZ 2025

    I'm going Friday most likely but may go Saturday for the raffle/ drawings: GM 572 BB, 800hp Supercharged LS from Blueprint, 4l80 from Hughes, wheels, etc Last year after a guy won a motor, Summit went ahead and gave the guy a trans to go with it parts to complete the truck.
  12. B

    LED tail light recs?

    Since United Pacific has issues.... There is a guy in Argentina that does LED lights very reasonably. They are very high quality, hand made. He can design whatever you want; sunburst, sequential, etc. He's made a lot of custom lights for my Nova and my friends and he did some for a Corvette on...
  13. B

    LED tail light recs?

    Well this is a real bummer. None of my friends have had issues but they don't put the miles on that you do.
  14. B

    LED tail light recs?

    I know several people that have them, including myself( I don't count as they are still in boxes) and none have mentioned any problems. That doesn't mean it doesn't happen but I haven't heard it. Next weekend is Dino's Git Down and I'd suspect 500 of the trucks probably run their products. I'll...
  15. B

    LED tail light recs?

    United Pacific are pretty high quality.
  16. B

    Chain/Rope Hoist vs Lift (cherry picker)

    I used to have an overhead hoist and it was great for loading trucks, engines, etc. and one day I'd like to have that set-up again. The commonly sold engine hoists really have a lot of issues: Booms are too short, they sit too high and hit x-members and control arms, don't lift high enough...
  17. B

    Wanted: 90-91 suburban/k5/k30 instrument cluster

    480.395.3240 Adam in Apache Junction, AZ Parts out a lot of late Suburbans.
  18. B

    Door swap question

    Yes, did all 4 doors on my dually recently with fenders and hood on
  19. B

    Is this an aftermarket rear slider?

    Please let me know how it works out. Where did you buy the window from? I ordered one earlier this year and they went backordered until now. My order was cancelled and the price went up substantially. They were $269.
  20. B

    Glow Shift Gauges review

    I looked at their stuff a few times. My pros and cons... Cons: All 6 gauges have their name which is excessive. Actually 9 gauges if I do the pillar and add boost/ vacuum, trans temp, etc They don't offer a bezel to fit my '90 which is 1.5 or double din. Pros: Price Flexibility/ customization...
  21. B

    Time for a change. Lets talk flip kits. Help me understand!

    I don't like flip "kits" I prefer $20 Mopar axle/spring perches and an hour or two of welding/ set-up. Cleaner, cheaper, simpler, and how the factory would do it. No C- notch needed if not going to tow/haul. If planning on towing/ hauling, I'd buy a notch that helps maintain frame strength by...
  22. B

    11 inch drums fix or Disk brake conversion?

    For heavy items like drums/ rotors, I usually order from Summit to save on shipping. They are a few dollars more but usually it's less than the RA shipping.
  23. B

    Nobody warned me about the MPGs on these square bodies!

    My '89 K5 (350 Tbi, 700r4) on 35's got 12-14. I added a Vortech S-trim with a big pulley so around 4-5 psi boost and the gas mileage actually went up 1 mpg consistently. I think because it no longer had to "lug" when accelerating. I believe the truck dyno'd right around 225 rwhp with the...
  24. B

    FOR SALE - Gold Upper and Lower Side Mouldings for 1977 GMC Jimmy or Chevy K5 by Mar-K

    If it was for a short bed and less than $1000, I probably would
  25. B

    FOR SALE - Gold Upper and Lower Side Mouldings for 1977 GMC Jimmy or Chevy K5 by Mar-K

    I have to disagree. I looked at their trim a few years back for our '77 and it was around $2k if I recall correctly. Here is Summits clearance price on just the lower. Not a blazer, and not '77 and still $2300 assuming top would be same price.. If it was less than a $1000, I would have bought it

Latest posts

Forum statistics

Threads
48,668
Posts
1,074,246
Members
43,339
Latest member
Jeremy89
Top