Search results

  1. Ontheboulder

    Tail light modification

    I went ahead with the tail light mod. it puts out some more light to the side,doesn't seem to affect anything to the rear of the truck. the usually darker side of the lens is now got light!! Some new LED bulbs should really light it up back there
  2. Ontheboulder

    Anyone dealt with LMC Trucks for parts?

    I would call them and speak to a supervisor
  3. Ontheboulder

    1983 HEATER BOX BROKEN

    Check LMC truck or classic industries
  4. Ontheboulder

    Need help with 465 clutch adjustment

    Well now it’s making sense! Sounds like the pressure plate is sticking and maybe has some broken springs. Sitting since 2007 hasn’t done any good
  5. Ontheboulder

    Need help with 465 clutch adjustment

    did you put the clutch plate in correctly?
  6. Ontheboulder

    1988 K5 headlight issues

    on mine it was the ground an the low beam, Octane lighting is the housings I got
  7. Ontheboulder

    1988 K5 headlight issues

    I went to an H4 bulb setup on my 87, had to swap the ground and low beam wires in the connector,just changed their position in the connector works great!! hope this helps
  8. Ontheboulder

    horn question??

    well just a quick update, the horn is working!! the lights are working!!! and I got the windshield wipers to working!!!, this truck has been a challenge for sure.lots of little stuff gone wrong from sitting and previous owners work. Now time to get back at it and re-install the dash and get on...
  9. Ontheboulder

    Front axle off set to passenger side

    the grease coming out means it is full!
  10. Ontheboulder

    Front axle off set to passenger side

    from that quote I would bet your frame is tweeked.
  11. Ontheboulder

    Flip up wipers arms?

    what was the length of the arm from the hook to the splined shaft on the cowl??
  12. Ontheboulder

    Flip up wipers arms?

    I have been looking for the same solution,My 89 chevy has flip up wipers but the wiper arm is a lot longer than those on my 87 gmc. sure would be handy to find a good swap
  13. Ontheboulder

    Anybody use classic industries

    check out Headwaters seat covers.com
  14. Ontheboulder

    horn question??

  15. Ontheboulder

    horn question??

    update, I got the horns to work,wasn't jumping them the right way,so re installed got them working up to the plunger on the turn switch,now waiting on parts for under the horn pad on the steering wheel-- whew!!:cool: :cool:
  16. Ontheboulder

    horn question??

    HA HA just a bit on the expensive side for something I would hardly use but they would be cool!! not much to honk at around here except turkey and deer on the road
  17. Ontheboulder

    horn question??

    well I think my horns are toast. took both of them off, tried to go direct to the battery and nothing
  18. Ontheboulder

    horn question??

    that plunger rides on the turn cancel cam on the bottom side
  19. Ontheboulder

    horn question??

    not sure myself, just thought maybe the horn would work just by pushing that little plunger down by hand, it may need to be grounded,then pushed
  20. Ontheboulder

    horn question??

    so after the turn signal install, I want to make sure the horn is working before I put everything back together. If I push the little plunger down on the turn signal switch down should the horn sound off or am I missing a ground of some sort with the lock plate not installed?? I know there is a...
  21. Ontheboulder

    Tail light modification

    I guess all I would be out is a new mount for the lens of it doesn't work
  22. Ontheboulder

    Tail light modification

    I would only be cutting out on the line that is shown, It is like a plastic fin of sorts, seems to me it would put a little more light out to the side as to alert some of the sleepy ddrivers that are out there these days. LED bulbs are coming
  23. Ontheboulder

    Tail light modification

    my thought was that it might put more light out to the side on the brake and turn signal usage, not so much with just tail lights, I am gonna go with LED bulbs back there at some point. I think it should still be sealed as I wouldn't be disturbing the gasket around the lens cover
  24. Ontheboulder

    Tail light modification

    Anyone else done this? Thinking of cutting away this part so to get a little more light out of the side of the tail lights and turn signal and brakes too. Thoughts?
  25. Ontheboulder

    brake lights no worky!!

    Broken wire and burnt connection!

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,187
Members
43,338
Latest member
jw23655
Top