Search results

  1. D

    Fuel tank mounting brackets

    That's what I'm gonna go ahead and do. Hopefully it works out
  2. D

    Fuel tank mounting brackets

    Just a quick follow up in case anyone on the future lands here. I called Brothers Trucks this morning and they told me those brackets are meant to be "universal" for square bodies and are meant to be welded on. Well, if they get welded on, then there's no way to remove the tanks from the...
  3. D

    Fuel tank mounting brackets

    Do you know if the 81-up brackets had nuts welded onto them? My old brackets do but the new ones don't - I don't know how I'm supposed to get my hand in there to get nuts on once the tanks are in the straps
  4. D

    Fuel tank mounting brackets

    I am in the process of replacing my dual fuel tanks, and ordered some new mounting brackets and straps from brothers. I noticed that the brackets on the passenger side don't line up with the bolt holes, whereas the old does. This is the front passenger side only - the rear passenger lines up...
  5. D

    EFI Dual Tank Conversion, need help on power 4 the pumps.

    That’s a nice kit
  6. D

    EFI Dual Tank Conversion, need help on power 4 the pumps.

    You used the weather packs for the trailer wiring? Or for the fuel pump wiring?
  7. D

    EFI Dual Tank Conversion, need help on power 4 the pumps.

    Cool, thanks again. I just finished getting the new tanks set up with the senders and pumps. I bought everything from Tanks, Inc. One of the reps there helped me over the phone, and recommended which pumps and senders to buy. The new tanks look almost identical to the factory tanks. The finish...
  8. D

    EFI Dual Tank Conversion, need help on power 4 the pumps.

    Thanks for the info! 1977 K10 with dual tanks Using the PF4 system like you said. Headers with dual exhaust out the back. My pressure regulator is mounted right at the passenger side fuel rail - I used a 90 degree AN-6 fitting right off the fuel rail and then installed the regulator directly...
  9. D

    EFI Dual Tank Conversion, need help on power 4 the pumps.

    Got my new tanks, straps, brackets and everything else. I’m going to take a stab at wiring this weekend I think
  10. D

    EFI Dual Tank Conversion, need help on power 4 the pumps.

    I don’t know much about electrical... I don’t know what any of this even means :(
  11. D

    EFI Dual Tank Conversion, need help on power 4 the pumps.

    Perfect timing lol... please do. In the mean time, I’ll have to learn to read an electrical diagram
  12. D

    EFI Dual Tank Conversion, need help on power 4 the pumps.

    So how did you end up wiring this up? I installed a Pro Flo 4 system last year and have been running on a single, external pump since then, butthats just not cutting it. Yesterday I bit the bullet and ordered two new tanks, pumps, senders and sets of mounting brackets and straps from Tanks, Inc...
  13. D

    Leaf spring removeal

    I did all four of mine last year and replaced with Poly. The fronts both came out fine, as somebody before me had already replaced with poly. The rears were an absolute nightmare. I had to cut both the heads and nuts off both sides, and then use an acetylene torch to burn out the old bushings...
  14. D

    Simplified dual tank with sniper EFI

    Just finished installing my PF4 last month, with a frame mounted fuel pump. The frame mounted pump is not cutting it. It gets too hot and stops working properly. I'm looking now into replacing both fuel tanks with these...
  15. D

    Truetrak

    What is the difference between a FF and non-FF? Is a non-FF not any good? Just took my entire rear end apart and getting ready to rebuild soon with a TrueTrak, so reading up on all the info
  16. D

    TV cable and bracket help

    No worries, I appreciate the help anyway, and thanks for the heads up.
  17. D

    TV cable and bracket help

    I just wanted to update on this. I went ahead and ordered all three of the parts I liked above - the Edelbrock carb adapter, the TV bracket, and the TV cable. It cost 167$ after shipping, and took a few days to get here. Quality wise, the cable is ok. The bracket was just cheap made in Taiwan...
  18. D

    TV cable and bracket help

    Is that the 8031 that Turbo3Whl linked? And thank you for the info, both of you. I actually saw this: https://www.tciauto.com/tv-cable-corrector-kit-for-700r4-2004r-transmissions-edelbrock-carburetor.html Is this something that should work for me? Edited to add: I found this YouTube video...
  19. D

    TV cable and bracket help

    I've been reading about the 700R4 trans and how important it is to have the TV cable properly lined up and adjusted. After looking at a few pictures, mine doesn't look right. I was hoping somebody could help me and let me know how I should fix this. I wouldn't mind just buying a new TV cable...
  20. D

    Help with instrument cluster - 77 K10

    It does have blade and not glass. I just got finished taking a look at all the wiring - it's is an absolute rat's nest. I don't know how I'm going to get that sorted out.
  21. D

    Help with instrument cluster - 77 K10

    Here are the colors going to the pins in the harness. There are some pictures above if it helps any Pin -------- Color 1 - Light Green 2 - Grey 3 - Black 4 - Pink w/ black stripe 5 - Brown (maybe tan, hard to tell if the wire is just discolored) 6 - Pink 7 - Pink 8 - Black 9 - Dark Green 10 -...
  22. D

    Help with instrument cluster - 77 K10

    I actually saw this table a few days ago, but some things don't line up - my dark blue wire is on pin 12, which is not listed on that table anywhere. Dark blue only shows as 1, 3 or 5 on the table. Also, I have two pink wires at pin 18, and the table doesn't show pink at pin 18 anywhere. Any...
  23. D

    Help with instrument cluster - 77 K10

    My main concern is the possibility that the previous owner threw 81-84 gauge assembly in there, without replacing the harness. Can anybody tell from the pictures I posted whether that is the harness for a 77, or the harness for an 81-84?
  24. D

    Help with instrument cluster - 77 K10

    I am adding a few more pics I took of the cluster wiring harness, hoping somebody can point me in the right direction. I also read in a post from here that the 77 only came factory with a mechanical oil pressure gauge - electric didn't start until 78. Mine is electric, and is one of the only...
  25. D

    Help with instrument cluster - 77 K10

    That's correct, the spot on the bottom left where the clock would be has not been punched out. So should I be getting the circuit board for a 83-84? Or should the 77 board work on the cluster housing that I have? Here are a few pics I just took of what I pulled out https://imgur.com/O5Y4S4Q...

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,183
Members
43,338
Latest member
jw23655
Top