Search results

  1. curse

    1979 c10 wheel lug measurement

    I was having trouble getting posts to post, sorry. Anyways mine measures 5", thanks for the helpful info everyone!
  2. curse

    1979 c10 wheel lug measurement

    Did 4.75" wheel lug bolt pattern come on any 79 c10s? Everything I read says 5". Mine is 4.75"
  3. curse

    lug bolt pattern

    Everything I've read says my 79 2wd c10 wheel bolt pattern should be 5". When I measure I get 4.75" Was it available in both sizes?
  4. curse

    lug bolt pattern

    Everything I've read says my 79 2wd c10 wheel bolt pattern should be 5". When I measure I get 4.75" Was it available in both sizes?
  5. curse

    what is this plug?

    I know. I got all new vacuum lines and haven't ran them yet.
  6. curse

    what is this plug?

    Yes it does
  7. curse

    what is this plug?

    I'll try letting it hang and see what happens. Thanks.
  8. curse

    what is this plug?

    My crate motor has a distributor in it with this plug but the truck harness does not have the other end. Am I going to have to use a distributor without this plug?
  9. curse

    700r4 swap

    Thanks
  10. curse

    700r4 swap

    My 700r4 is about 30 3/8 inches. the th350 looks like it's 27 5/8 inches.
  11. curse

    700r4 swap

    And yes I am familiar with the tv cable and its adjustment. Does anyone have a link to how to wire the lockup without buying the kit?
  12. curse

    700r4 swap

    Well crap, it looks like they are about 2-3 inches different. th350 is shorter and has the 6 inch tail housing. So shortening the driveshaft should be good??? I'm also looking into the lockup wiring. Is this what is needed...
  13. curse

    700r4 swap

    I've done some reading and not really finding a good answer for my situation. I bought a crate 350 hooked to a remanufactured th350 for my 79, 2 wheel drive short bed if it matters. I found out the th350 is really a 700r4. I'd like to use the reman 700r4. I've done some reading and some say to...
  14. curse

    1979 350 egr issue

    Can I still use the egr valve if the thermal vacuum valve is bad (I broke it)?
  15. curse

    Short step side bed swap 1984

    I will PM them to you when I get some free time
  16. curse

    Short step side bed swap 1984

    I just picked up my fleetside last weekend. Selling my stepside but it needs fenders.
  17. curse

    Short bed measurement needed

    Thanks guys, that should be good enough. I can get the 4x4's cut and attach whatever i'm going to use in the stake pockets when I get there.
  18. curse

    Short bed measurement needed

    No. I'm pulling a trailer behind my van. trailer is long enough but too narrow.
  19. curse

    Short bed measurement needed

    Yes, should be
  20. curse

    Short bed measurement needed

    Fleetside.
  21. curse

    Short bed measurement needed

    I'm going to be picking up a bed for my truck. Can someone with a short bed get me measurements from center of stake pocket to center of other stake pocket driver side to passenger side? I will be transporting it upside down on 4x4's with something attached to go into the stake pockets.
  22. curse

    gas tank info please

    Here's your pic. It's a 2 barrel and the motor is a 77 305. I opened the carb up and the float is fine...needle is fine...plunger looks fine. still no gas flow. Like I said, It is getting gas out of the line that goes to the carb. I just want to be able to move the truck if needed. I got a low...
  23. curse

    gas tank info please

    I bought a hose, unhooked the hose from the mechanical pump that runs back to the tank, ran the new hose from the mechanical pump to the gas can which was on the ground in front of the truck. The new hose is 4 foot long and the gas in the can is ethanol free. I eliminated any potential issues in...
  24. curse

    gas tank info please

    Will do, thanks charlie.
  25. curse

    gas tank info please

    I bypassed the tank by using a gas can. No luck = same condition. I should have just started at the line that goes into carb but didn't. Carb gets gas at the line going into it but the gas does not get into the carb. I did change the filter in the carb and tested without the filter. I'm thinking...

Latest posts

Forum statistics

Threads
48,413
Posts
1,066,820
Members
42,794
Latest member
Huffer8
Top